Feed terminal - Fieldbus power supply/segment module KL9190

Feed terminal - Fieldbus power supply/segment module KL9190 – Beckhoff: KL9190 feed terminal, supply voltage at AC 50 Hz=24..230 V, supply voltage at DC=24..230 V, type of supply voltage=AC/DC, number of HW interfaces others=1, with optical interface=no, supports protocol for TCP/IP=no, supports protocol for PROFIBUS=no, supports protocol for CAN=no, supports protocol for INTERBUS=no, supports protocol for ASI=no, supports protocol for KNX=no, supports protocol for MODBUS=no, supported Protocol for Data-Highway=no, supports protocol for DeviceNet=no, supports protocol for SUCONET=no, supports protocol for LON=no, supports protocol for PROFINET IO=no, supports protocol for PROFINET CBA=no, supports protocol for SERCOS= No, supports protocol for Foundation Fieldbus=no, supports protocol for EtherNet/IP=no, supports protocol for AS-Interface Safety at Work=no, supports protocol for DeviceNet Safety=no, supported Protocol for INTERBUS-Safety=no, supports protocol for PROFIsafe=no, supports protocol for SafetyBUS p=no, supports protocol for other bus systems=no, radio standard Bluetooth=no, radio standard WLAN 802.11=no, system component=yes, degree of protection (IP) =IP20, design of the electrical connection=spring-loaded connection, with electrical isolation=yes, with feed module=yes, suitable as segment module=no, spacer module=no, fieldbus connection via separate bus coupler possible=yes, bus diagnostics possible=no, DIN rail mounting possible=yes, wall /direct mounting possible=no, front mounting possible=no, rack mounting possible=no, suitable for safety functions=no, associated equipment (Ex ia)=no, associated equipment (Ex ib)=no, explosion protection category for gas=none, Explosion protection category for dust=none, width=12 mm, height=100 mm, depth=68 mm