LED exit sign light - Emergency luminaire 5,8W IP41 StyleII51011LEDCG-S

LED exit sign light - Emergency luminaire 5,8W IP41 StyleII51011LEDCG-S – Ceag – 40071356813 – 4012539369455: LED escape sign luminaire StyleII51011LEDCG-S, function=escape route marking, suitable for labeling type=sticker, with pictogram=yes, monitoring device=monitoring module (centrally supplied system), switching type=maintained/standby mode, with remote switch connection=no, feed=central (central battery), lamps =LED not interchangeable, with lamp=yes, socket=other, number of lamp heads=1, housing material=plastic, housing color=grey, cover material=plastic opal, type of voltage=AC, nominal voltage=220..240 V, control gear =LED control gear, current-controlled, degree of protection (IP)=IP41, impact resistance=IK03, protection class=II, luminaire with limited surface temperature ''D mark''=yes, rated ambient temperature according to IEC62722-2-1=-20..40 °C , Max. system power=5.8 W, rated luminous flux according to IEC 62722-2-1=390 lm, color temperature=6500 K, power factor=0.611, viewing distance=17 m, width=95 mm, height/depth=59.5 mm, Length=34 2 mm, installation width=95 mm, type of wiring=with through-wiring, number of poles=3, conductor cross-section=2.5 mm², connection type=screw connection, safety or escape sign luminaire with light emission on one side in accordance with DIN EN 60598-1, DIN EN 60598 -2-22, DIN 4844-1 and DIN EN 1838. Modular luminaire consisting of: Luminaire housing made of 850°C glow wire-resistant, halogen-free polycarbonate for tool-free assembly on the quick assembly kit. Including a clear protective hood and three pictogram foils (arrow right, left, down, according to ISO 7010). As an emergency light: Symmetrical light distribution for area illumination with at least 1lx according to DIN EN 1838 for mounting heights of up to 9.5 m. Maximum distance between luminaires: > 10 m from a mounting height of 3 m and > 13 m from a mounting height of 5 m (calculation basis: min. 1lx in the middle of the escape route (maintenance factor = 0.8). As an escape sign: Illumination in accordance with DIN 4844-1: mean luminance of the white contrasting color Lm >= 500 cd/m². Long service life > 50000 h thanks to optimized LED operating conditions. Special LED converter with integrated monitoring module for monitoring individual lights with 20-digit address switches. Mixed operation of the switching types (non-maintained light, maintained light or switched maintained light) is possible within a circuit without additional data or switching lines to the lights in conjunction with suitable group or central battery systems with STAR technology. Permissible temperature range: -20°C to + 40°C. The quick assembly kit is not included in the scope of delivery and must be ordered separately. Type of installation: wall mounting Illuminant: LED Lamp power: 4 W Switching: other Material of the housing: plastic Housing colour: gray Material of the cover: plastic opal Type of marking: only on one side Suitable for marking type: sticker Monitoring device: monitoring module (centrally supplied system) Ball-proof: no Switching type : Maintained mode/standby mode With remote switch connection (VDE 0100-718, VDE 0108-100): Yes Feed-in: central (central battery) Rated voltage: 220 - 240 V Protection class: II Degree of protection (IP): IP41 With illuminant: Yes Length: 342 mm Width: 95 mm height/depth: 59.5 mm Luminous flux in emergency mode: 100% Viewing distance: 17 m