Cast resin branch sleeve with EG cast resin - Transition joint 5x4mm² Y00

Cast resin branch sleeve with EG cast resin - Transition joint 5x4mm² Y00 – Cellpack – 133841 – 4010311053868: Cast resin junction sleeve with EG cast resin Y00 type Y branch, cast resin design, number of conductors 5, nominal conductor cross-section branch cable 2.5... 2.5mm², nominal conductor cross-section main cable 4... 4mm², cable diameter branch cable 8... 19mm, cable diameter main cable 8... 19mm, Connection accessories supplied without, Suitable for N(A)YY, Halogen-free, Cast resin junction sleeve can be used universally for branching off cables and lines with insulation made of PVC, PE, VPE and EPR (e.g. N(A) YY, NYM, TT) with and without concentric conductor. Suitable for single branch terminals on copper and aluminum conductors. Areas of application: indoor, outdoor, ground, water, installation ducts. Properties: Compact dimensions, splice position visible before casting, high-quality, transparent, impact-resistant plastic mold shells, large filling opening for easy casting, resistant to chemical influences, resistant to alkaline earths, stabilized against UV rays, longitudinally and transversely watertight, high electrical insulation values, high mechanical strength, immediately ready for operation, quick and easy assembly, saves time and money. Scope of delivery: hydrolysis-resistant PUR casting resin EG, ready-to-mix, measured in a practical two-chamber mixing bag, transparent plastic mold shell, stopper, filling and venting funnel, PVC insulating tape, protective gloves, assembly instructions.