Compact combination arrester for 2 single wires - Combined arrester for signal systems BCO CL2 BE...

Dehn - BCO CL2 BE HF 5 - Compact combination arrester for 2 single wires - Combined arrester for signal systems BCO CL2 BE...
Photo source: fig. possibly similar
Photo source: fig. possibly similar
BCO CL2 BE HF 5 927970 4013364411982 EAN/GTIN DE 11890845 WEEE

£53.63 incl. VAT (£0.00)
£106.92 (-49.84% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Combined arrester for signal systems, Combined arrester for signal systems Nominal voltage DC 5... more
Compact combination arrester for 2 single wires - Combined arrester for signal systems BCO CL2 BE... – Dehn – 927970 – 4013364411982: Combined arrester for signal systems, Combined arrester for signal systems Nominal voltage DC 5 ... 5V, Max. continuous voltage AC 6V, Max. continuous voltage DC 8,5V, Lightning impulse current (10/350 µs) 3kA, Nominal discharge surge current (8/20) 10kA, Nominal load current 0,75A, Voltage protection level core/core 50V, Voltage protection level core/earth 70V, Limiting frequency 150MHz, Mounting method DIN rail (top hat rail) 35 mm, Connection 1 Clamp, Pro-active thermo-control
... more
Rated voltage DC 5 V
Highest continuous voltage AC 6V
Highest continuous voltage DC 8.5V
Lightning impulse current (10/350 µs) 3 kA
Nominal discharge current (8/20) 10 kA
Nominal load current 0.75 A
Protection level wire / core 50V
Protection level core / earth 70 V
Cut-off frequency 150 MHz
Mounting DIN rail TH35
Connection 1 Push-in terminal
SPD yes
With telecommunication contact no
Explosion-tested version no
Separation option for signal circuit no
Number of conductors (without earth) 2
Earthing via DIN rail
Overall width 6 mm
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Compact combination arrester for 2 single wires - Combined arrester for signal systems BCO CL2 BE..."
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.