Surge arrester 3 in 1 solution - Surge protection for signal systems DVR BNC RS485 230

Dehn - DVR BNC RS485 230 - Surge arrester 3 in 1 solution - Surge protection for signal systems DVR BNC RS485 230
Photo source: fig. possibly similar
Photo source: fig. possibly similar
DVR BNC RS485 230 928440 4013364280809 EAN/GTIN DE 11890845 WEEE

£135.19 incl. VAT (£0.00)
£269.52 (-49.84% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Surge protection for signal systems Nominal voltage AC 230 ... 230V, Nominal voltage DC 5 ... 5V,... more
Surge arrester 3 in 1 solution - Surge protection for signal systems DVR BNC RS485 230 – Dehn – 928440 – 4013364280809: Surge protection for signal systems Nominal voltage AC 230 ... 230V, Nominal voltage DC 5 ... 5V, Max. continuous voltage AC 255V, Max. continuous voltage DC 6,4V, Nominal discharge surge current (8/20) 5kA, Nominal load current 0,1A, Voltage protection level core/core 1500V, Voltage protection level core/earth 1500V, Voltage protection level core/signal ground 550V, Voltage protection level signal ground/protective ground 550V, Limiting frequency 300MHz, Mounting method DIN rail (top hat rail) 35 mm, Connection 1 BNC, 75 Ohm, Pro-active thermo-control, Signalling at the device Optic
... more
Rated voltage AC 230V
Rated voltage DC 5 V
Highest continuous voltage AC 255V
Highest continuous voltage DC 6.4V
Nominal discharge current (8/20) 5 kA
Lightning impulse current (10/350 µs) 1 kA
Nominal load current 0.1 A
Protection level wire / core 1500 V
Protection level core / earth 1500 V
Protection level wire / signal ground 550V
Protection level Signalground / Protectiveground 550V
Cut-off frequency 100 MHz
Mounting DIN rail TH35
Connection 1 BNC, 75 ohms
SPD yes
With telecommunication contact no
Signaling on the device optical
Explosion-tested version no
Separation option for signal circuit no
Number of conductors (without earth) 5
Earthing via separate head
Overall width 36 mm
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Surge arrester 3 in 1 solution - Surge protection for signal systems DVR BNC RS485 230"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.