Latching relay - Extension module SIR 16 L

Latching relay - Extension module SIR 16 L – Doepke – 09500153 – 4014712064928: Latching relay SIR 16 L mounting type DIN rail, expansion module function, central function OFF, group switch, run-on function, number of channels 0, time range 0min, number of universal dimming channels 0, number of dimming functions 0, surge function, number of channels 1, shutter/sun protection control , number of channels 0, wind sensor 0m/s, temperature sensor 0°C, brightness sensor 0lx, twilight sensor 0lx, number of channels 1, contact design make contact, control voltage 1 24 ... 24V, type of control voltage 1 DC, control voltage 2 0V, type of control voltage 2 DC, Rated current 16A, max. switching current (cos phi = 0.6) 13A, dimming power per channel 0W, rated voltage 230 ... 230V, rated frequency 0Hz, degree of protection (IP) IP40, width in modular units 1, width 18mm, height 85mm, depth 65mm , The SI system (current pulse system) is a control and automation technology for hard-wired installation. Due to the wide range of function modules and the logic through the wiring, it enables the implementation of a large number of control tasks. This includes the light and time-dependent switching of electrical consumers (e.g. lights, roller shutters, blinds), dimming functions for low-voltage and DALI lights or the protection of roller shutters and awnings from wind and rain. These can be supplemented with individual group and central commands as required. The SI system does not require any PC programming, so it can be installed conventionally. Since the wiring largely corresponds to the controls with relay or contactor circuits, the expenses for planning and commissioning are very low. Due to the consistent use of the control and supply voltage of 24 V DC and the strict separation between safety extra-low voltage and low-voltage side, the components are compact, cost-effective and immune to interference. In addition, control cables with a length of up to 100 m allow easy connection of standard switch programs even in large buildings. The system is particularly suitable for lighting control. Among other things, remote dimmers, the DALI gateway and twilight sensors are available for this purpose. Impulse switch, also: remote or impulse switch or Eltako, switch on with an electrical impulse and off again with another. The devices of the SIR series can be used universally thanks to their 24 V surge technology. The design is suitable for installation in electrical distribution boards. The bistable load relay SIR 16 L is also suitable for high, inductive loads. With its various inputs, it can be integrated into central on or central off commands or operated as a monostable relay. Properties: low control power, powerful switching contact, small space requirement (1 TE) switching status display by LED, type of installation: quick mounting on DIN rail, areas of application: the relay is generally suitable for switching tasks in the 230 V network, e.g. B. for controlling lights. drives etc.