Standard accumulator 2,2...3kW AEG WSP 3011

Standard accumulator 2,2...3kW AEG WSP 3011 – EHT AEG – 238690 – 4041056033464: Heat accumulator 3kW, 400V, ws AEG WSP 3011 Standard accumulator design, connected load 2.2 ... 3kW, nominal connected load 3kW, connection voltage 400V, with pre-assembled heating element, with electronic charge controller, AC control system selectable, can be connected to DC control system, fault display, fluff filter in Air intake area, number of selectable power levels 4, color white, width 780mm, height 650mm, depth 275mm, weight 40kg, rated voltage 1 400V, rated voltage 2 400V, with static discharge, with temperature controller, APPLICATION: Heat storage tank for floor installation as full heating for apartments and businesses for Use of low-tariff models with off-times. EQUIPMENT/COMFORT: Compact heat accumulator with a construction depth of 275 mm incl. 30 mm wall distance grid. Integrated electronic charge controller with C-PLUS technology for fully automatic demand-based charging without additional control units. Integrated room temperature controller with operation via display and easy programming. Adjustable room temperature from +5 to +30°C. Room temperature controller with programmable weekly timer with 2 preset and 1 individually programmable time program. Adaptive control as a learning function for precisely reaching the comfort temperature in timer mode. Selectable function to detect an open window. Programmable comfort and setback temperature. Connected load can be reduced in four stages (100/91.6/83.3/75%). Control input for AC signals (230V AC voltage). Control input for DC signals (0.91 - 1.43V DC voltage) available as an optional accessory. Optional additional heating can be integrated. High-quality thermal insulation technology for high heat retention capacity. With fluff filter in the air intake as standard. Particularly quiet with tangential fans. Adjustable child safety device to prevent unintentional or unauthorized adjustments to the control panel. INSTALLATION/SERVICE: Installation directly on the floor or off the floor on floor consoles. Only one type of core stone (2 stones/package). Easily accessible electrical connection with fold-out connection panel in niches. Connection direct with NYM. Permanent control voltage required. SECURITY: Protection class I, protective temperature limiter