Centrifugal in-line fan - Conduit mounted ventilator 250m³/h 41W RR 100 A

RR 100 A 05653 4010184056539 EAN/GTIN DE 31687255 WEEE

Our best price
£93.48 incl. VAT (£0.00)
£177.31 (-47.28% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Centrifugal tube fan RR 100 A, housing material=steel, treated, unloaded air volume=250 m³/h,... more
Centrifugal in-line fan - Conduit mounted ventilator 250m³/h 41W RR 100 A – Helios – 05653 – 4010184056539: Centrifugal tube fan RR 100 A, housing material=steel, treated, unloaded air volume=250 m³/h, supply voltage=230 V, power consumption=0.041 kW, with thermal protection=yes, DC motor=no, indirect drive=no, electrical connection =Connection terminals, Degree of protection (IP)=IP44, Max. air temperature=60 °C, 2-speed motor=no, Suitable for electronic control=yes, Suitable for frequency control=no, Suitable for low-voltage control=no, Suitable for transformer control=no, Pole-changing=no, length=188 mm, housing diameter=243 mm, duct diameter=100 mm, connection=flange, radial duct fan for direct installation in the duct system. For conveying medium and small air volumes against high resistance. Casing made of galvanized sheet steel with round connection pieces matched to standard pipes. Centrifugal impeller with backward curved plastic blades. Pressed directly onto the motor and dynamically balanced as a unit. Low noise, high efficiency. Single-phase AC external rotor motor, closed design, maintenance-free, speed controllable by voltage reduction, built-in thermal contacts, sealed, low-noise ball bearings with long-term lubrication.
... more
Material of the housing Steel, treated
Air volume unloaded 250 m³/h
Supply voltage 230V
Input 0.041 kW
With thermal protection yes
DC motor no
Indirect drive no
Electrical connection Terminals
IP protection) IP44
Max. air temperature 60 °C
Two-speed motor no
Suitable for electronic controls yes
Suitable for frequency control no
Suitable for weak current control no
Suitable for transformer control no
Pole switchable no
Length 188 mm
Housing diameter 243 mm
Channel diameter 100 mm
Connection Flange

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Centrifugal in-line fan - Conduit mounted ventilator 250m³/h 41W RR 100 A"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.