Electric pre-heating for KWL EC 200W/300W - Duct heater, electric KWL-EVH 200/300 W

Helios - KWL-EVH 200/300 W - Electric pre-heating for KWL EC 200W/300W - Duct heater, electric KWL-EVH 200/300 W
Photo source: fig. possibly similar
Photo source: fig. possibly similar
KWL-EVH 200/300 W 04224 4010184042242 EAN/GTIN DE 31687255 WEEE

Our best price
£151.35 incl. VAT (£0.00)
£187.04 (-19.08% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Electric preheater for KWL EC 200W/300W KWL-EVH 200/300 W, Electric preheater for simple, plug-in... more
Electric pre-heating for KWL EC 200W/300W - Duct heater, electric KWL-EVH 200/300 W – Helios – 04224 – 4010184042242: Electric preheater for KWL EC 200W/300W KWL-EVH 200/300 W, Electric preheater for simple, plug-in unit iFor preheating the outside air at very low outside temperatures (heat exchanger frost protection). Mandatory for passive houses. Output: 1000 W.
... more
Suitable for heat recovery systems yes
Type of electrical accessories other

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Electric pre-heating for KWL EC 200W/300W - Duct heater, electric KWL-EVH 200/300 W"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.