High-pressure in-line fan 1-PH - Ex-proof ventilator VARW 225/2 EX

Helios - VARW 225/2 EX - High-pressure in-line fan 1-PH - Ex-proof ventilator VARW 225/2 EX
Photo source: fig. possibly similar
Photo source: fig. possibly similar
VARW 225/2 EX 06734 4010184067344 EAN/GTIN DE 31687255 WEEE

£1,743.21 incl. VAT (£0.00)
£2,815.62 (-38.09% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
High-pressure tube fan 1-PH VARW 225/2 EX Rated voltage 230 ... 230V, frequency 50 ... 50Hz,... more
High-pressure in-line fan 1-PH - Ex-proof ventilator VARW 225/2 EX – Helios – 06734 – 4010184067344: High-pressure tube fan 1-PH VARW 225/2 EX Rated voltage 230 ... 230V, frequency 50 ... 50Hz, power consumption 1780kW, air volume unloaded 1780m³/h, medium temperature -20 ... 40°C, protection class (IP) IP55, Nominal diameter duct 225mm, installation location pipe, device group according to directive 94/9/EG II, temperature class according to directive 94/9/EG T1 to T3, high-pressure tube fan with cylindrical tube sleeve, flanges on both sides, directly driven, explosion-proof according to ATEX. Cylindrical tube made of galvanized sheet steel, with flange formed on both sides, hole pattern according to DIN 24155, built-in guide vane. Mixed flow impeller, eight three-dimensionally curved thermoplastic blades. Vibration-free operation thanks to dynamic balancing according to quality level G 6.3 VDI 2060 and DIN ISO 1940. Single-phase AC capacitor motor, closed design, maintenance-free, sealed, low-noise ball bearings with long-term lubrication. Ex version according to ATEX.
... more
Nominal voltage 230V
Frequency 50 Hz
Input 1780 kW
Material of the housing Steel
Air volume unloaded 1780 m³/h
Medium temperature -20..40 °C
IP protection) IP55
Nominal duct diameter 225 mm
Installation Pipe
Device group according to Directive 94/9/EC II
Temperature class according to Directive 94/9/EC T3

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "High-pressure in-line fan 1-PH - Ex-proof ventilator VARW 225/2 EX"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.