Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).

show less

Background masking photoelectric sensor, Adjustment range = 20..450 mm, Operating distance =... more

Close menu

Sensor optical - Background masking photoelectric sensor OT170420 – Ipf Electronic: Background masking photoelectric sensor, Adjustment range = 20..450 mm, Operating distance = 20..450 mm, Triangulation = Background fade-out, Pre failure notice = no, With time delay function = no, Rated switching distance = 450 mm, Max. switching distance = 450 mm, Max. output current = 200 mA, Reflector included = no, Analogue output 0 V ... 10 V = no, Analogue output 0 mA ... 20 mA = no, Analogue output 4 mA ... 20 mA = no, Analogue output -10 V ... +10 V = no, With other analogue output = no, Setting procedure = Manual adjustment, With communication interface analogue = no, With communication interface AS-Interface = no, With communication interface CANOpen = no, With communication interface DeviceNet = no, With communication interface Ethernet = no, With communication interface INTERBUS = no, With communication interface PROFIBUS = no, With communication interface RS-232 = no, With communication interface RS-422 = no, With communication interface RS-485 = no, With communication interface SSD = no, With communication interface SSI = no, Number of semiconductor outputs with signalling function = 1, Type of electric connection = Connector M12, Type of switching output = PNP, Type of switch function = Anticoincidence, Explosion safety category for gas = None, Explosion safety category for dust = None, Construction type housing = Cuboid, Width sensor = 15,4 mm, Height of sensor = 50 mm, Length of sensor = 50 mm, Sensing mode = Light-/dark switching, Material of optical surface = Plastic, Material housing = Metal, Ambient temperature = -25..65 °C, Switching frequency = 500 Hz, Rated control supply voltage Us at DC = 10..30 V, Voltage type = DC, With monitoring function downstream switching devices = no, Wavelength of the sensor = 660 nm, Type of light = Polarity free red light, With restart blockage = no, Suitable for safety functions = no, Degree of protection (IP) = IP67

... more

Close menu

Adjustment	20..450 mm
Operating distance	20..450 mm
Triangulation	Background suppression
Failure warning	no
With time function	no
Rated operating distance	450 mm
Max. Switching distance	450 mm
Max. Output current	200 mA
With reflector	no
Analog output 0 V ... 10 V	no
Analog output 0 mA ... 20 mA	no
Analog output 4 mA ... 20 mA	no
Analogue output -10 V ... +10 V	no
With other analog output	no
Adjustment	manual adjustment
With communication interface analog	no
With communication interface AS-Interface	no
With communication interface CANOpen	no
With communication interface DeviceNet	no
With communication interface Ethernet	no
With communication interface INTERBUS	no
With communication interface PROFIBUS	no
With communication interface RS-232	no
With communication interface RS-422	no
With communication interface RS-485	no
With communication interface SSD	no
With communication interface SSI	no
Execution of the switching output	PNP
Execution of the switching function	complementary
Explosion protection category for gas	without
Explosion protection category for dust	without
Housing construction	Cuboid
Width of the sensor	15.4 mm
Height of the sensor	50 mm
Length of the sensor	50 mm
Key function	light / dark switching
Material of the optical surface	Plastic
Material of the housing	Metal
Minimum reflector distance	20 mm
Ambient temperature	-25..65 °C
Switching frequency	500 Hz
Rated control supply voltage Us at DC	10..30 V
Voltage	DC
Wavelength of the sensor	660 nm
Light Source	Red light unpolarized
With restart interlock	no
Suitable for safety functions	no
IP protection)	IP67

show downloads

Close menu

To inquiry form

Close menu

Read, write and discuss reviews... more

Close menu

Customer review for "Sensor optical - Background masking photoelectric sensor OT170420"

Write a review

Evaluations will be activated after verification.

Sensor optical - Background masking photoelectric sensor OT170420

Description

Technical specifications

Downloads

Inquiry

Description

Technical specifications

Downloads

Inquiry

Frequently bought

Frequently bought

Useful

Useful

Interesting

Interesting

Customers also bought

Customers also bought

Customers also viewed

Customers also viewed

Viewed from you

Viewed from you

Rate item

Rate item