Sliding insertion 8-14 mm - Surface mounted box 120x95mm AT2264

Kaiser - AT2264 - Sliding insertion 8-14 mm - Surface mounted box 120x95mm AT2264
Photo source: fig. possibly similar
Photo source: fig. possibly similar
AT2264 8712259359205 EAN/GTIN DE 34742207 WEEE

£3.23 incl. VAT (£0.00)
£5.34 (-39.51% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Surface mounted box 120x95mm, Surface mounted box 120x95mm Max. conductor cross section 6mm²,... more
Sliding insertion 8-14 mm - Surface mounted box 120x95mm AT2264 – Kaiser – 8712259359205: Surface mounted box 120x95mm, Surface mounted box 120x95mm Max. conductor cross section 6mm², Equipped with Mounting plate, Shape Rectangular, Mounting method On central conduit box, For tube diameter 16/19 mm, Inlet from the rear, Length 120mm, Width 95mm, Depth 50mm, Number of inlets 10, Material Plastic, Halogen free, Surface protection Untreated, Colour Grey, Degree of protection (IP) IP40, Cover model None, Cover attachment Snapped on, Rated insulation voltage Ui 690V, Circuit integrity None, Working temperature -40 ... 70°C
... more
Max. Conductor cross section 6 mm²
Assembly Mounting plate
Shape rectangular
Mounting on central socket
Mounting in the ground no
Mounting under water no
For pipe diameter 16/19 mm
Introduction from the back yes
Length 120 mm
Width 95 mm
Depth 50 mm
Stacking no
Number of introductions 10
Type of housing feedthrough Prestamping
Material Plastic
Halogen free yes
Surface protection untreated
Colour gray
IP protection) IP40
Version cover without
Transparent lid no
Cover attachment snapped
Castable no
With casting compound included no
Sealable no
Rated insulation voltage Ui 690V
Integrity without
With shielding no
Weatherproof no
Operating temperature -40..70 °C
Explosion-tested version no
For ex-zone gas without
For ex-zone dust without

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Sliding insertion 8-14 mm - Surface mounted box 120x95mm AT2264"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.