Background suppression button - Background masking photoelectric sensor HT3C/4P-M8

Leuze - HT3C/4P-M8 - Background suppression button - Background masking photoelectric sensor HT3C/4P-M8
Photo source: fig. possibly similar
Photo source: fig. possibly similar
HT3C/4P-M8 50129375 DE 32276143 WEEE

Our best price
£138.85 incl. VAT (£0.00)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Background masking photoelectric sensor, Background masking photoelectric sensor Adjustment range... more
Background suppression button - Background masking photoelectric sensor HT3C/4P-M8 – Leuze – 50129375: Background masking photoelectric sensor, Background masking photoelectric sensor Adjustment range 450 ... 15mm, Operating distance 5 ... 450mm, Triangulation Background fade-out, Max. output current 100mA, Setting procedure Manual adjustment, Number of semiconductor outputs with signalling function 2, Type of electric connection Connector M8, Type of switching output PNP, Operation agent-safety class Safety class 3, Construction type housing Cuboid, Width sensor 11,4mm, Height of sensor 34,2mm, Length of sensor 18,3mm, Sensing mode Light switching, Material housing Plastic, Ambient temperature -40 ... 60°C, Time of reaction 0,5ms, Switching frequency 1000Hz, Voltage type DC, Wavelength of the sensor 633nm, Type of light Polarity free red light, Degree of protection (IP) IP67
... more
Adjustment 15..450 mm
Operating distance 5..450 mm
Triangulation Background suppression
Failure warning no
With time function no
Max. Output current 100mA
With reflector no
Analog output 0 V ... 10 V no
Analog output 0 mA ... 20 mA no
Analog output 4 mA ... 20 mA no
Analogue output -10 V ... +10 V no
With other analog output no
Adjustment manual adjustment
With communication interface analog no
With communication interface AS-Interface no
With communication interface CANOpen no
With communication interface DeviceNet no
With communication interface Ethernet no
With communication interface INTERBUS no
With communication interface PROFIBUS no
With communication interface RS-232 no
With communication interface RS-422 no
With communication interface RS-485 no
With communication interface SSD no
With communication interface SSI no
Execution of the switching output other
Execution of the switching function other
Operating resource protection class Protection class 3
Explosion protection category for gas without
Explosion protection category for dust without
Housing construction Cuboid
Width of the sensor 11.4 mm
Height of the sensor 34.2 mm
Length of the sensor 18.3 mm
Key function light switching
Material of the optical surface other
Material of the housing other
Max. Output current at the safe output 0 mA
Ambient temperature -40..60 °C
Reaction time 0.5 ms
Switching frequency 1000 Hz
Switching voltage of the OSSD in high state 0 V
Rated control supply voltage Us at DC 10..30 V
Voltage DC
Laser protection class without
Wavelength of the sensor 633 nm
Light Source Red light unpolarized
With restart interlock no
Suitable for safety functions no
IP protection) other

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Background suppression button - Background masking photoelectric sensor HT3C/4P-M8"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.