LED moisture-proof light 4000K - Ceiling-/wall luminaire 151540500006

LED moisture-proof light 4000K - Ceiling-/wall luminaire 151540500006 – Lichtline – 4260374012825: LED moisture-proof luminaire 4000K 151540500006 Energy efficiency class of the light source according to EU regulation 2019/2015 not relevant, suitable for wall mounting, suitable for pendant suspension, suitable for ceiling mounting, suitable for surface mounting, socket other, housing material plastic, surface protection housing untreated, housing color grey, material of the cover plastic opal, design of the louvre without, type of voltage AC/DC, rated voltage 220 ... 240V, rated current 157 ... 157mA, control gear LED control gear, current-controlled, with control gear, without dimming function, light distributor diffuser lens/optics/panel, Symmetrical light distribution, beam angle unshielded/diffuse, color consistency (McAdam ellipse) SDCM5, light emission direct, rated service life L80/B10 at 25 °C 50000h, luminous flux reduction at aver. Service life 50,000 h at 25 °C ambient temperature. 20%, failure rate at average Service life of 50,000 h at 25 °C ambient temperature. (tq) 5%, max. number of lights miniature circuit breaker B16 92, max. number of lights miniature circuit breaker C16 92, degree of protection (IP) IP65, impact resistance IK08, protection class I, luminaire with limited surface temperature ''D mark'', rated ambient temperature according to IEC62722-2-1 -20 ... 45°C, suitable for emergency lighting, glow wire test according to IEC 60695-2-11 650 °C - 30 s, max. system power 36W, luminous efficacy of luminaire 139lm/W, rated luminous flux according to IEC 62722-2- 1 5000lm, light color white, color temperature 4000 ... 4000K, color rendering index CRI 80-89, power factor 0.95, width 63mm, height/depth 75mm, length 1552mm, type of wiring with through-wiring, number of positions 3, conductor cross-section 1.5mm², connection type Plug-in terminal, photobiological safety according to EN 62471 RG1, glare limitation (UGR) 28.1, adjustable color temperature no, adjustable luminous flux no, adjustable beam angle no, illuminant LED replaceable, with illuminant, LED moisture-proof luminaire with through-connector wiring for indoor and outdoor use. Simple, quick installation on the wall or ceiling. Mounting brackets are included. Fastening possible over the entire length of the luminaire. Existing drill holes can be used for mounting. The ballast is integrated into the lamp. The smooth surface has a low tendency to get dirty and is easy to clean. The lamp is dust-tight, protected against water jets and impact-resistant up to 5J. Long service life, high luminous flux, good color rendering, wide distribution. Low maintenance. Energy savings of up to 50% compared to a conventional moisture-proof light. Unbreakable, suitable for use in IFS-certified areas.