LED system ClickLUX 4000K wide. - Gear tray for light-line system 701540560082

LED system ClickLUX 4000K wide. - Gear tray for light-line system 701540560082 – Lichtline – 4260374014850: LED system ClickLUX 4000K wide. 701540560082 Energy efficiency class of the light source according to EU regulation 2019/2015 not relevant, illuminant LED replaceable, with illuminant, housing material aluminium, housing color aluminium, type of voltage AC/DC, nominal voltage 220 ... 240V, nominal current 244 ... 244mA, LED Rated current at constant current 680 ... 680mA, control gear LED control gear, current-controlled, with control gear, replaceable control gear, manufacturer-specific dimming, light distributor focus lens, light distribution symmetrical, light emission direct, beam angle extremely wide >80°, color consistency (McAdam ellipse) SDCM4, rated service life L80 /B10 at 25 °C 50000h, luminous flux reduction at aver. Service life 50,000 h at 25 °C ambient temperature. 20%, failure rate at average Service life of 50,000 h at 25 °C ambient temperature. (tq) 5%, degree of protection (IP) IP40, protection class I, glow wire test according to IEC 60695-2-11 850 °C - 30 s, suitable for emergency lighting, max. system power 56W, rated luminous flux according to IEC 62722-2-1 8700lm, luminous efficacy of the luminaire 155lm/W, light color white, color temperature 4000 ... 4000K, color rendering index CRI 80-89, power factor 0.95, beam angle adjustable no, color temperature adjustable no, luminous flux adjustable in steps, width 65mm, height/depth 1528mm, length 67mm, type of Wiring with through-wiring, 5 poles, conductor cross-section 2.5mm², connection type flat plug, universally applicable LED light line module for indoor use. Quick and easy installation on mounting rails from sites including Siteco, Ridi, Regiolux, Philips, Ludwig, Zumtobel, Trilux. The list of all compatible mounting rails can be found at Blanking covers and connection cables are available for empty panels. Connection with ClickLUX connector plug, 7-pin, optionally available. Light output adjustable via DIP switch (100%, 75%, 50%). With phase change. Suitable as a replacement for a conventional one or two-lamp T8/T5 trunking system. through wiring. Optimum light control through lens technology. High-quality aluminum housing. flicker free Mounting brackets are slidably mounted on the luminaire. Long service life, high luminous flux, good color rendering. Particularly even light distribution. Low maintenance. Energy savings of up to 50% compared to a conventional light line system. Unbreakable, suitable for use in IFS-certified areas.