Room air control b. 6 PushPull devices - Wall remote control heating appliances RLS 45 K

Room air control b. 6 PushPull devices - Wall remote control heating appliances RLS 45 K – Maico – 0157.0360 – 4012799573609: Room air control b. 6 PushPull devices RLS 45 K Wall remote control version, Suitable for ventilation systems, Features: The room air control is required as an accessory for the PP 45 K, PP 45 O and PP 45 RC. To control the PP 45 RC, another EnOcean module PP 45 EO is required in addition to the room air control. The RLS 45 K room air control has the following setting options: 5 ventilation levels with heat recovery: 15 / 22 / 30 / 35 / 43 m³/h Operating modes: continuous ventilation (with heat recovery), cross ventilation and automatic mode Ventilation mode with heat recovery: push-pull operation. The devices run alternately and change the running direction every 70s. Cross-ventilation operating mode: One device is permanently in supply air mode and the corresponding device in exhaust air mode (e.g. for summer night cooling). In automatic mode, the delivery volume is infinitely adjusted to the sensor value (H, CO2, VOC). Timed boost ventilation, timed shutdown and safety shutdown communication with exhaust air devices. When the exhaust air devices start up, the PP devices switch to supply air ModBus configuration with PC or laptop Up to 6 devices can be controlled simultaneously via an RLS 45 K room air control. Item: RLS 45 K, installation location: wall, installation type: flush-mounted, installation position: vertical, width: 80 mm, height: 80 mm, depth: 49 mm