Small room fan 92 m3/h, DN 100 - Small-room ventilator surface mounted AKE 100

Small room fan 92 m3/h, DN 100 - Small-room ventilator surface mounted AKE 100 – Maico – 0084.0220 – 4012799842200: Small room fan 92 m3/h, DN 100 AKE 100 mains frequency 50Hz, rated voltage 230V, surface-mounted mounting type, housing material plastic, color white, volume flow 92m³/h, protection class (IP) IPX4, nominal width 100mm, other composition, axial design, ventilation direction, Intelligently programmed automatic cellar dehumidification for the highest demands. Integrated automatic humidity control. Concealed suction through design cover. Barrier-free product as it switches on/off automatically without additional switches. Fan monitors the room humidity. Frost protection function: Switching off the system when internal temperatures fall below 5 °C. Additional manual operation for 20min. can be switched on and off again using a button. No additional installation from the switch to the device is necessary. Additional manual continuous operation possible with a switch. Status and function display using LEDs. Scope of delivery: fan, external flap, sensors, 1m connecting cable, not speed controllable. For dehumidification. Protection class IP X4. Protection class II. Color traffic white similar to RAL 9016. Housing made of impact-resistant plastic. Thermal overload protection. Frost protection: To prevent the room from cooling down, the AKE has a frost protection function. The fan switches off automatically at indoor temperatures of less than 5 °C. Dry protection: To prevent the room from drying out, the AKE has a dry protection function. The fan switches off automatically when the relative room humidity is below 30%. Motor: Energy-saving, robust motor with ball bearings, maintenance-free. Suitable for continuous operation. Installation instructions: Easy installation, AKE 100: core hole 105 mm, or 120 mm when installed with accessory wall sleeve WH 100. AKE 150: core hole 155 mm, or 170 mm when installed with wall sleeve WH 150. Wall and ceiling mounting possible. Electrical connection: Electrical connection either surface-mounted or flush-mounted. Surface installation for AKE 100 with accessory spacer frame ECA-DR. Article: AKE 100, delivery volume: 92 m3/h, speed: 2500 1/min, speed controllable: no, reversibility: no, SEC average: -24.18 kWh/(m2*a), voltage type: alternating current, rated voltage: 230 V , Mains frequency: 50 Hz, Rated power: 8 W, Stand-by power consumption: 2 W, IMax: 0.06 A, Protection class: IP X4, Mains cable: 5 / 1.5 mm2, Installation location: Wall, Installation type: Surface-mounted, Installation position : any, material: plastic, color: traffic white, similar to RAL 9016, weight: 0.804 kg, flap: none, nominal width: 100 mm, cable length: 1 m, width: 159 mm, height: 159 mm, depth: 130 mm, wall thickness : max. 0.85 m (if 1m cable length is not sufficient, please order the 6m sensor cable), conveyor temperature at IMax: 40 °C, sound pressure level: 32 dB(A) / distance 3 m, free field conditions