Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).

show less

Supply voltage AC 50 Hz=0 V, Supply voltage AC 60 Hz=0 V, Supply voltage DC=19,2..30 V, Voltage... more

Close menu

Inline input terminal analog - Fieldbus analogue module 0 In / 0 Out IB IL TEMP 2 RTD-PAC – Phoenix – 2861328 – 4017918894269: Supply voltage AC 50 Hz=0 V, Supply voltage AC 60 Hz=0 V, Supply voltage DC=19,2..30 V, Voltage type of supply voltage=DC, Input, current=no, Input, voltage=no, Input, resistor=yes, Input, resistance thermometer=yes, Input, thermocouple=no, Input signal, configurable=no, Resolution of the analogue inputs=16 Bit, Output, current=no, Output, voltage=no, Output signal configurable=no, Analogue inputs configurable=no, Analogue outputs configurable=no, Number of HW-interfaces other=2, Supporting protocol for TCP/IP=no, Supporting protocol for PROFIBUS=no, Supporting protocol for CAN=no, Supporting protocol for INTERBUS=no, Supporting protocol for ASI=no, Supporting protocol for KNX=no, Supporting protocol for MODBUS=no, Supporting protocol for Data-Highway=no, Supporting protocol for DeviceNet=no, Supporting protocol for SUCONET=no, Supporting protocol for LON=no, Supporting protocol for PROFINET IO=no, Supporting protocol for PROFINET CBA=no, Supporting protocol for SERCOS=no, Supporting protocol for Foundation Fieldbus=no, Supporting protocol for EtherNet/IP=no, Supporting protocol for AS-Interface Safety at Work=no, Supporting protocol for DeviceNet Safety=no, Supporting protocol for INTERBUS-Safety=no, Supporting protocol for PROFIsafe=no, Supporting protocol for SafetyBUS p=no, Supporting protocol for other bus systems=no, Radio standard Bluetooth=no, Radio standard Wi-Fi 802.11=no, IO link master=no, System accessory=yes, Degree of protection (IP)=IP20, Type of electric connection=Other, Fieldbus connection over separate bus coupler possible=yes, Rail mounting possible=yes, Wall mounting/direct mounting=no, Front built-in possible=no, Rack-assembly possible=no, Suitable for safety functions=no, SIL according to IEC 61508=None, Appendant operation agent (Ex ia)=no, Appendant operation agent (Ex ib)=no, Explosion safety category for gas=None, Explosion safety category for dust=None, Width=12,19999999 mm, Height=138,44 mm, Depth=70,51 mm

... more

Close menu

Supply voltage at AC 50 Hz	0 V
Supply voltage at AC 60 Hz	0 V
Supply voltage at DC	19.2..30 V
Voltage type of the supply voltage	DC
Entrance, electricity	no
Input, voltage	no
Entrance, resistance	yes
Entrance, resistance thermometer	yes
Input, thermocouple	no
Input signal configurable	no
Resolution of the analog inputs	16 bits
Output, electricity	no
Output, voltage	no
Output signal configurable	no
Analog inputs configurable	no
Analog outputs configurable	no
Number of HW interfaces other	2
Supports protocol for TCP / IP	no
Supports protocol for PROFIBUS	no
Supports protocol for CAN	no
Supports protocol for INTERBUS	no
Supports protocol for ASI	no
Supports protocol for KNX	no
Supports protocol for MODBUS	no
Supports data highway protocol	no
Supports protocol for DeviceNet	no
Supports protocol for SUCONET	no
Supports protocol for LON	no
Supports protocol for PROFINET IO	no
Supports protocol for PROFINET CBA	no
Supports protocol for SERCOS	no
Supports protocol for EtherNet / IP	no
Supports protocol for DeviceNet Safety	no
Supports protocol for INTERBUS safety	no
Supports protocol for PROFIsafe	no
Supports protocol for SafetyBUS p	no
Supports protocol for other bus systems	yes
Wireless standard Bluetooth	no
Wireless standard WLAN 802.11	no
IO-Link master	no
System component	yes
IP protection)	IP20
Execution of the electrical connection	other
Rail mounting possible	yes
Wall / direct mounting possible	no
Front installation possible	no
Rack mounting possible	no
Suitable for safety functions	no
SIL according to IEC 61508	without
Associated equipment (Ex ia)	no
Associated equipment (Ex ib)	no
Explosion protection category for gas	without
Explosion protection category for dust	without
Width	12.15 mm
Height	2,61242 cm³
Depth	70.51 mm

To inquiry form

Close menu

Read, write and discuss reviews... more

Close menu

Customer review for "Inline input terminal analog - Fieldbus analogue module 0 In / 0 Out IB IL TEMP 2 RTD-PAC"

Write a review

Evaluations will be activated after verification.

Inline input terminal analog - Fieldbus analogue module 0 In / 0 Out IB IL TEMP 2 RTD-PAC

Description

Technical specifications

Inquiry

Description

Technical specifications

Inquiry

Frequently bought

Frequently bought

Useful

Useful

Accessories

Accessories

Interesting

Interesting

Customers also bought

Customers also bought

Customers also viewed

Customers also viewed

Viewed from you

Viewed from you

Rate item

Rate item