AP hygrostat PHAP mechanical pure white changer 05104803

AP hygrostat PHAP mechanical pure white changer 05104803 – PROTEC.class – PHAP – 4016705148035: Mechanical surface-mounted room hygrostat. Serves to monitor and regulate the relative humidity, e.g. in business premises, apartments, winter gardens, bathrooms, swimming pools, computer rooms. The effect of the relative humidity on a measuring tape activates a potential-free changeover contact. The setpoint is set using the adjustment button on the front. The setting range can be limited. Number of outputs: 2. Number of control ranges: 1. Output signal1: Humidification, switching. Output signal2: Dehumidification, switching. Humidify: 3 (0.2) A. Dehumidify: 5 (0.2) A. Switching voltage: 24-230 VAC, 50 Hz. Min. switching current: 100 mA. Operating voltage: no auxiliary energy required. Average power consumption: 0 W. Setting range: 30 - 100. Electrical connection: screw terminals 0.5...2.5 mm2. Housing material: ABS plastic. Sensor: plastic fibers. Hysteresis: approx. 4% rH Mechanical range adjustment. Medium: air, non-aggressive. Mounting: surface/wall mounting (4-hole mounting on flush-mounted box Ø 55 mm). Surface finish: matt. Potential free. Control range: 30 - 100%. Control function: humidification or dehumidification Switching element: microswitch. Switching contact: changeover switch (changeover contact). Switching capacity: Terminal 4: 1150 W, Terminal 2: 690 W. Protection class: II, after appropriate assembly. Safety and EMC: according to DIN EN 60730. Setpoint adjuster. Degree of contamination: 2. Storage temperature: -20° to +60°C. Ambient temperature: +10° to +60°C. Permissible air humidity: max. 95% r. H., non-condensing. Dimensions case: 78.3 x 25.5 x 83.4 mm. Weight: approx. 90g. Note: Observe wet cell distance according to DIN VDE 0100-701!