Concealed hygrostat PHUP mechanical pure white changer 05104804

Concealed hygrostat PHUP mechanical pure white changer 05104804 – PROTEC.class – PHUP – 4016705148042: Flush-mounted mechanical room hygrostat with standard frame 50x50, used to monitor and regulate the relative humidity, e.g. in business premises, apartments, winter gardens, bathrooms, swimming pools, computer rooms, the effect of the relative humidity on a measuring tape activates a potential-free changeover contact, The setpoint is set using the adjustment button on the front, number of outputs: 2, number of control ranges: 1, output signal1: humidification, switching, output signal2: dehumidification, switching, protective cap, rated surge voltage: 4000 V, contact protection cover, average power consumption: 0 W, Electrical connection: screw terminals 0.5.2.5 mm2, housing material: plastic PC, sensor: plastic fibers, hysteresis: approx. 5% rH, measuring accuracy: +/- 4% rH, storage temperature: -20° to +60°C, switching voltage : 24-230 VAC, 50 Hz, Min. switching current: 100 mA, Max. switching current: dehumidification (terminal E) 5 (0.2) A, humidification (terminal B) 2 (0.2) A, operating voltage: no auxiliary energy necessary, mechanical range adjustment, medium: air, non-aggressive, mounting: in flush-mounted box Ø 55 mm - with cover set 50 x 50 mm or 55 x 55 mm adaptable to almost all surface switch programs (deep flush-mounted box recommended), potential-free, control range : 35 to 85%, control function: humidification or dehumidification, switching element: microswitch, switching contact: changeover switch (changeover contact), switching capacity: terminal E: 1150 W, terminal B: 460 W, protection class: IP30, protection class: II, after appropriate assembly , safety and EMC: according to DIN EN 60730, setpoint adjuster, ambient temperature: 0° to +50°C, degree of pollution: 2, permissible air humidity: max. 95% r. H., non-condensing, dimensions of housing: 81 x 44.5 x 85 mm, weight: approx. 90 g, color: pure white, similar to RAL 9010, glossy, note: observe wet cell clearance according to DIN VDE 0100-701!,