Radio extractor control unit EB - Accessory for cooker hood FDS 100

Radio extractor control unit EB - Accessory for cooker hood FDS 100 – Schabus – 300268 – 4044764000605: Radio extractor control EB FDS 100 Type of accessories other, By using the radio exhaust control FDS 100 with DIBt approval, an exhaust system can only be used when the window is open and the necessary supply air can flow into the room The transmitter on the window sash monitors whether the window is open or closed and transmits this information via radio to the built-in receiver, which only releases the power supply when the window is tilted or opened. FDS 100 with DIBt approval Z-85.2-11, lighting independent of the window position: The receiver is equipped with a potential-free changeover contact and can therefore be connected to the extractor hood's fan motor supply line so that the extractor hood's lighting works independently of the window position, control of a Control contact: Some manufacturers of exhaust air systems provide a contact that only controls the fan motor, often provided with a wire bridge when delivered - this bridge is released and switched to the normally open contact of the FDS 100. Second window (OR): At least one window must be open so that the exhaust air system can be switched on - for this purpose the FDS 100 SET is expanded with the additional transmitter FDS 098 for the second window. Second window (AND): Two windows must be open at the same time for the exhaust system to turn on. This requires two independent FDS 100 SETs with different coding. The receiver relays must be connected in series. Second receiver: An additional receiver (installation FDS 199 or adapter plug FDS 299) can be controlled for the existing FDS 100 set. As soon as the window is opened, both receivers activate the respective exhaust system. FDS 100 combined with exhaust gas temperature monitor: As soon as the exhaust gas temperature in the exhaust pipe exceeds 40 degrees C, the window must be opened: FDS 100 combined with radio exhaust gas temperature monitor FTX SET. As soon as the exhaust gas temperature in the exhaust pipe exceeds 40 degrees C, the window must be opened: FTX with FDS 100 set. Technical data: Operating voltage: 230 VAC/50-60 Hz, power consumption: approx. 5.5 W, relay switching capacity: 1150 W/5 A, radio frequency: 868 MHz, range: up to 20 m in free field, functional range: -15 ° C/+40 °C, protection class: IP 20, battery transmitter: CR2032/3 V, receiver (HxWxD): 53x53x31 mm, transmitter (HxWxD): 55x31x18 mm, magnet (HxWxD): 55x15x18 mm, spacer plate (HxWxD): 55x15x5 mm