Radio exhaust air control with thermal switch - Accessory for cooker hood FTW 520

Radio exhaust air control with thermal switch - Accessory for cooker hood FTW 520 – Schabus – 300529 – 4044764003521: Radio exhaust air control with thermal switch FTW 520 Type of accessories other, By using the radio temperature monitor FTW 519 on the stove pipe, an exhaust air system can only be used if the stove or combustion site is not running and is cold or a window has been opened. A transmitter in the wireless temperature monitor monitors whether the oven is on fire or is off and transmits this information wirelessly to the receiver. This only releases the power supply to the connected device when the oven is off. If the oven is on, the exhaust system can still be operated with the window open. For optimal radio transmission, the FTW transmitter is equipped with an external antenna. The receiver is simply plugged between the socket and the power plug of the device to be switched. The power plug fuse prevents the device plug from being accidentally changed. The FTW 519 is installed using a flange that is screwed to the side of the stove pipe. The maximum permissible temperature at the FTW transmitter is 65 °C, the FTW must be freely surrounded by room air and is not mounted above heat-dissipating parts, a free stove pipe is always visible in the room and is neither covered nor walled in - a typical example is one in Room-standing Swedish stove, the stovepipe of which is only connected to the chimney after at least 1 m. Additional transmitter for second window: In order to have a choice between two windows (OR function), it is possible to use an additional transmitter FDS 098 with the same code, which is programmed at the factory. Second receiver: An additional receiver (installation FDS 199 or adapter plug FDS 299) can be controlled in addition to the existing set. As soon as the oven is cold or a window has been opened, both receivers activate the connected device. When ordering additional devices, always provide the serial number of your existing receiver. Technical data receiver: Operating voltage: 230 V/50-60 Hz, power consumption: approx. 7.6 W, relay switching capacity: 1150 VA/5 A, radio frequency: 868 MHz, range: up to max. 40 m in free field, functional range: - 15 °C/+40 °C, protection class: IP 40, receiver (HxWxD): 121x57x46 mm, technical data transmitter: switching threshold: 40 degrees +/-7K, approx. 15K hysteresis, max. sensor temperature: 500 °C, max. Ambient temperature: 180 °C, max. switching housing temperature: 65 °C, response time: less than 45 seconds, installation: 3 holes in the smoke pipe, must be installed by a specialist company, dimensions (HxWxD): approx. 183x68x85 mm, incl. antenna, battery Included in delivery, CR2 3 V Longlife. Technical data window contact transmitter: Switching threshold: up to max. 1.5 cm from the magnet, response time: less than 0.5 seconds, installation: attachment to window frames and sashes, transmitter dimensions (LxWxH): 55x31x18 mm, magnet dimensions (LxWxH ): 55x15x18 mm, frequency: 868 MHz SRD, range: up to 20 m in open field, battery included: CR2032 3 V