SIDOOR AT40 RELAY - Door control system 6FB1111-0AT10-3AT2

SIDOOR AT40 RELAY - Door control system 6FB1111-0AT10-3AT2 – Siemens – 4047618095659: SIDOOR AT40 RELAY 6FB1111-0AT10-3AT2 Controller version, degree of protection (IP) IP20, type of external power supply, rated power consumption 80W, control inputs, control outputs, input voltage per DC input 10 ... 28V, input current per DC input 0.009 ... 0.027 A, max. output current at DC 0.4A, max. door/gate weight 600kg, max. door/gate width 5000mm, serial interface, max. opening cycles per hour 180, manufacturer-specific system components required, SIDOOR AT40 RELAY control device for elevator doors, horizontal, up to 600kg door weight, 36VDC, 1*RS485, 4*DI, 3*relays, 1*24VDC Out, -20-+50 degrees Celsius SIDOOR door control systems for elevators are suitable for every door system and are quick and easy to commission with one button easy to install and particularly easy to maintain: Thanks to accessible data evaluation, which is possible via CANopen, you always know the condition of the elevator doors and when they need maintenance. Using the optional CAN interface, which many of our SIDOOR controllers have, and the CANopen CIA 417 Lift application profile, you can use your own tools to read out the relevant door control data on the Virtual Terminal. In connection with the main control, this is broken down by floor using a web server and WLAN throughout the building. To manage several locations, service parameters and status reports from the door can be transmitted to MindSphere (the cloud-based, open IoT operating system from Siemens) via the elevator control and evaluated worldwide. The data evaluation is not limited to the door control and is even possible for components from all manufacturers via the main control with the appropriate interface. With the MindApp FleetManager, preventive condition-based maintenance becomes possible. The SIDOOR controllers for elevator doors and gates are available as SIDOOR AT40 BASIC, SIDOOR AT40 RELAY and SIDOOR AT40 CAN variants for DC geared motors for dynamic door weights of up to 600 kg. The SIDOOR ATE500E RELAY and SIDOOR ATE500E CAN are offered for the EC direct drive up to 280 kg. There are also SIDOOR controllers for industrial plant and machine protection doors, cold room doors or escape tunnel doors, interior train doors and platform screen doors. The SIDOOR SOFTWARE KIT and SIDOOR SERVICE TOOL are available as accessories. The SIDOOR NT40 or the SIDOOR TRANSFORMER is recommended for the power supply. Depending on the maximum mass to be moved, the four SIDOOR M2, M3, M4 and M5 DC geared motors are available as left and right variants and the SIDOOR MED280 EC direct drive. In order to replace the predecessors SIDOOR AT18 or SIDOOR AT25, the motor and the power supply unit must also be replaced. You replaced the large AT25 motor 30 VR/L with SIDOOR M4 R/L. You replaced the small AT25 motor 40 VR/L with SIDOOR M3 R/L.