SIDOOR ATD420W controller - Door control system 6FB1141-2AT10-3WE2

SIDOOR ATD420W controller - Door control system 6FB1141-2AT10-3WE2 – Siemens – 4034106459468: SIDOOR ATD420W controller 6FB1141-2AT10-3WE2 Design controller, degree of protection (IP) IP20, type of power supply external, supply voltage DC 36V, rated power consumption 145W, control inputs, control outputs, input voltage per DC input 10 ... 28V, input current per DC input 0.009 ... 0.027A, max. output current at DC 0.4A, max. door/gate weight 600kg, max. door/gate width 5000mm, serial interface, max. opening cycles per hour 180, manufacturer-specific system components required, SIDOOR ATD420W control unit for machine tools , up to 600kg door weight, 36VDC, 1*RS485, 4*DI, 2*relays, 1*PROFIBUS 1*24VDC Out-20-+50 degrees Celsius, EN 13849 Performance Level d, EN953 The SIDOOR controllers impress with their one button Commissioning and the resulting certified safety according to EN ISO 14120 (force, energy) and EN ISO 13849-1 PL d. In addition, a two-channel profile switch for robot loading or two-hand operation can be implemented easily but safely. Thanks to the PROFINET connection to a SIMATIC or SINUMERIK, innovative maintenance concepts can be made possible with MindSphere. The SIDOOR controllers for industrial plant and machine protection doors, cold room doors or escape tunnel doors are available as PROFINET, PROFIBUS or RELAY variants. There are also SIDOOR controllers for elevator doors and gates, interior train doors and platform screen doors. The SIDOOR DIN RAIL HOLDER is available as an accessory for installation in the control cabinet. Firmware updates can be imported with the SIDOOR SOFTWARE KIT and provide support with precise recording of the travel curve and the option of reading and writing the parameter set. The recommended power supply unit is the SITOP PSU8200 13 A / 36 V (plus secondary line protection 5SY4108-7) or the SIDOOR NT40. Depending on the desired dynamics, the SIDOOR TRANSFORMER can be used for a mass of up to 400 kg to be moved. For moving masses of up to 700 kg, there are approved motors, the SIDOOR MDG3, MDG4 and MDG5 optimized for the industrial environment, as well as the standard variants SIDOOR M3, M4 and M5.