Pipe group without mixer - Hydraulic control station 0010045839

Pipe group without mixer - Hydraulic control station 0010045839
Photo source: fig. possibly similar
Photo source: fig. possibly similar
0010045839 4024074924358 EAN/GTIN DE 63643866 WEEE

£3,044.64 incl. VAT (£0.00)
£4,155.95 (-26.74% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Material casing=Plastic, Material fittings=Brass, Material of unit pipework=Steel, Primary... more
Pipe group without mixer - Hydraulic control station 0010045839 – Vaillant – 4024074924358: Material casing=Plastic, Material fittings=Brass, Material of unit pipework=Steel, Primary connection=Other, Nominal diameter primary connection=DN 40, Secondary connection=Other, Nominal diameter secondary connection=2 inch (50), Max. operating pressure=6 bar, Temperature setting range=2..90 °C, Display area thermometer=0..120 °C, Power=224 kW, Suitable for heating=yes, Suitable for glycol=yes, Suitable for ethanol=no, Model=Unmixed heating circuit, With fitting piece for heat meter=no, With heat meter=no, With built-in circulation pump=yes, With pressure gauge=no, With thermometer=yes, With servomotor=no, With three-way valve=no, With pump ball valve=yes, With connection temperature sensor=no, With connection expansion reservoir=no, With automatic de-aeration=no, Wall set-up=yes, With wall-mounting bracket=no, With legs=no, With differential pressure regulator=no, With thermal insulation=yes, Extensible with a manifold=yes, Width=720 mm, Height=410 mm, Depth=260 mm
... more
Material Jacket Plastic
Fittings material Brass
Pipework material Steel
Primary connection other
Nominal diameter primary DN 40
Secondary connection other
Nominal diameter secondary 7891 lm
Max. Working pressure 6 bar
Setting range temperature 2..90 °C
Display range thermometer 0..120 °C
Power 224 kW
Suitable for heating yes
Suitable for glycol yes
Suitable for ethanol no
Execution unmixed heating circuit
With adapter for heat meter no
With heat meter no
Built-in circulation pump yes
With pressure gauge no
With thermometer yes
With mixing valve motor no
With three-way valve no
With pump ball valve yes
With temperature sensor connection no
With connection expansion vessel no
With automatic ventilation no
wall installation yes
With wall mounting bracket no
With feet no
With differential pressure controller no
With thermal insulation yes
Expandable manifold yes
Width 720 mm
Height 410 mm
Depth 260 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Pipe group without mixer - Hydraulic control station 0010045839"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.