Sensor/actuator distributor box 10-way, 3-pin, 5m, M8 - Passive sensor-actuator interface (with 7...

WAGO - 757-403/000-005 - Sensor/actuator distributor box 10-way, 3-pin, 5m, M8 - Passive sensor-actuator interface (with 7...
Photo source: fig. possibly similar
Photo source: fig. possibly similar
757-403/000-005 4044918978651 EAN/GTIN DE 40917098 WEEE

Our best price
£95.00 incl. VAT (£0.00)
£124.74 (-23.84% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Sensor/actuator distribution box 10x,3p,5m,M8 757-403/000-005 Cable outer diameter for cable... more
Sensor/actuator distributor box 10-way, 3-pin, 5m, M8 - Passive sensor-actuator interface (with 7... – WAGO – 4044918978651: Sensor/actuator distribution box 10x,3p,5m,M8 757-403/000-005 Cable outer diameter for cable gland 7.6...7.6mm, length of pre-assembled cable 5m, cable length configurable, number of sensor/actuator slots 10, Number of channels per slot 10, design of the outlets for sensor/actuator cables M8, number of poles of the sensor/actuator slots 3, rated voltage 32V, degree of pollution 3, operating voltage 10...30V, max. current carrying capacity per I/O signal 2A , Max. current carrying capacity per connection base 6A, Contact body material: brass, Contact coating material: gold, Insulator material: PA, Threaded sockets for sensor/actuator slots M8, With LED display, Drag chain suitability of the fixed cable version, Housing material: plastic, Housing color: other, Operating temperature -25... 80°C, degree of protection (IP) IP68, explosion protection category for gas without, explosion protection category for dust without, width 30mm, height 20mm, depth 175mm, M8 sensor/actuator rboxes, 4 6 8- and 10-way 3-pole (1 signal per connection) 5 and 10 m cable length (open cable end, 100 mm, stripped), 4-way sensor/actuator box with 2 m cable length (open cable end, 200 mm, stripped) LED operating display, green LED status display, yellow incl. labeling strips (Note: WMB labeling labels can be used as an alternative) incl. M8 protective caps (2 pieces)
... more
Length of the pre-assembled cable 5 m
Cable length configurable yes
Number of sensor / actuator slots 10
Number of channels per slot 10
Number of poles of the sensor / actuator slots 3
Rated voltage 32V
Pollution degree 3
Operating voltage 10..30 V
Max. Current carrying capacity per I / O signal 2 A
Max. Current carrying capacity per connection socket 6A
Material of the contact body Brass
Material of the contact coating Gold
Material of the insulating body Polyamide (PA)
Threaded sockets of the sensor / actuator slots M8
With LED display yes
With electrical isolation no
Connection for NPN sensors no
Trailing chain capability of fixed cable version yes
Material of the housing Plastic
Housing Color other
Operating temperatur -25..80 °C
IP protection) IP68
Explosion protection category for gas without
Explosion protection category for dust without
Width 30 mm
Height 20 mm
Depth 175 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Sensor/actuator distributor box 10-way, 3-pin, 5m, M8 - Passive sensor-actuator interface (with 7..."
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.