Differential pressure switch 40-600Pa, max.30KPa JDL-112

Differential pressure switch 40-600Pa, max.30KPa JDL-112 – Alre-it – H5309100 – 4050528044471: Differential pressure switch 40-600Pa, max.30KPa JDL-112 Suitable as monitor, max. operating pressure 300hPa, initial setting 40... 600hPa, max. test pressure 30000bar, medium temperature -15... 80°C, rated operating voltage Ue at AC 50 Hz 12. .. 250V, rated operating voltage Ue at DC 12... 24V, initial value measuring range pressure 40Pa, final value measuring range pressure 600Pa, rated operational current Ie at AC-1, 400 V 5A, number of auxiliary contacts as NO contact 0, number of auxiliary contacts as NC contact 0, number of the auxiliary contacts as changeover contacts 1, design of the electrical connection screw connection, number of NC contacts as main contacts 1, number of NO contacts as main contacts 1, degree of protection (IP) IP54, differential pressure switch for monitoring overpressure, differential or negative pressure of air and non-flammable, non-aggressive gases . Can be used as an extractor or fan monitor or flow monitor to safeguard electrical heating registers, as a filter monitor, low air pressure safety device or limit value controller. Note: Once the differential pressure switch has switched a voltage > 24 V and a current > 0.1 A, the gold layer on the contacts will have burned away. After that, the differential pressure switch can only be operated with this or a higher power. Note: The hose set JZ-06 / 1 is not included in the scope of delivery and must be ordered separately. Supplied with attached mounting bracket JZ-10.