Emergency stop rope switch
Emergency stop switches are very important safety devices and are mostly, but not exclusively, used in machines used in industrial production. Depending on the type and structure of the system, they are also required by law. The classic emergency stop switch shuts down the machine as soon as it is actuated. This prevents people from being injured in the event of a technical problem. A structural variant of this switch is the emergency stop with cable pull. This can also be equipped with a cable pull and is put into operation by pretensioning the cable. If the tension on the rope changes, either because the rope is pulled or if the rope breaks, the machine is switched off. In practical use, this means that the cable can be installed anywhere along a hazardous work area, for example, and the machine can be stopped from any point by pulling the cable. Inexpensive and reliable emergency stop rope pull switches are part of the eibabo electrical installation product range.
Catalogue content:
In this eibabo® catalogue Low-voltage industrial components > Emergency stop pull cord switch you will find items from the following product groups:
Item overview:
- Bowden cable emergency switch
- Cable switch
- Counter
- Emergency stop
- Emergency stop pull cord switch
- Emergency stop pull switch
- EMERGENCY STOP rope switch
- Pull cord switch
- Ripcord
- Safety switch
- Switch
from the following manufacturers:
Manufacturer overview catalogue Emergency stop rope switch:
- ABB
- Kiepe
- Rockwell
- Schmersal
- Schneider Electric
- Siemens
- Steute
