Current limiting relay 1 NO contact 10A/250V - Current limiter 600VA SBR61-230V/120µF

Current limiting relay 1 NO contact 10A/250V - Current limiter 600VA SBR61-230V/120µF – Eltako – 61100330 – 4010312205464: Current limiting relay 1 make contact 10A/250V SBR61-230V/120µF, max. apparent power=600 VA, mounting type=other, rated continuous current Iu=16 A, short-circuit current limiter=no, current limiting relay capacitive 230V/120 microfarads. 1 NO contact 10A/250VAC. No standby loss. For recessed installation. 45mm long, 45mm wide, 18mm deep. Maximum capacitive load 120 microfarads after rectifier (e.g. energy-saving lamps and electronic ballasts) or 60 microfarads directly on the mains (e.g. parallel-compensated fluorescent lamps). Limiting resistance 24 ohms, limiting duration approx. 15ms. The inrush current pulse of energy-saving lamps, fluorescent lamps and compact fluorescent lamps is limited to 10A by briefly (approx. 15ms) switching on high-load resistors (24 ohms). The current limiting relay is connected downstream of the relay contact of a switching device to be protected. Continuous load max. 600W, maximum switching frequency 600/h. Explanation of the capacitive load specification: The specification of the maximum capacitive load directly on the mains must be observed, for example for parallel-compensated fluorescent lamps or conventional ballasts. The capacitor for each lamp, which is located parallel to the mains, determines the correct dimensioning. The specification of the maximum capacitive load after the rectifier must be taken into account, for example for fluorescent lamps with electronic ballasts and energy-saving lamps. A replacement capacity of approx. 10 microfarads per bulb can be expected.