Add-on distributor 1 field - Distribution cabinet (empty) 1900x350mm FG21LD

Add-on distributor 1 field - Distribution cabinet (empty) 1900x350mm FG21LD – Hager – 3250612794669: Modular distributor 1-field FG21LD Installation type floor installation, type of cover door, cover version closed, type of door double, transparent cover/door, with lock, rated current (In) 1600A, height 1900mm, width 350mm, depth 400mm, installation depth 400mm, inner depth 400mm, material thickness Housing 2mm, material thickness door/cover 2mm, color grey, RAL number 7035, number of modules 144, number of rows 12, width in modular units 12, number of openings for flange plates 2, mounting options, number of cable entries 2, housing material steel , surface powder-coated, degree of protection (IP) IP54, protection class I, impact resistance IK10, functional integrity without, modular cabinet, univers, IP 54, protection class I, 1900x350x400mm, with transparency. Bayed cabinet for indoor assembly according to VDE 0660 part 600-1/-2, DIN EN 61 439-1/-2, dimensions according to DIN 43870 protection class, IP 54 according to DIN EN 60529 (VDE0470-1), protection class IP 3x with open door, Clearance and creepage distances according to VDE 0110, part 1 and 2/1.89, rated insulation voltage AC 800 V, overvoltage category IV, degree of pollution 3, insulation class II, protection class I grounded. Free-standing housing for single or row installation with removable rear and side panels, width 1 to 6 fields, 144 to 864 space units. Interior system can be installed for mains systems: 3 AC 50 Hz 230/400 V or 3 AC 50 Hz 400/690 V with a maximum feed current of 1600 A. Cabinet frame made of galvanized sheet steel, cover plate and rear panel made of hot-dip galvanized sheet steel. With horizontal support rail for stabilizing the mounting rail, coupling plates for mounting the mounting rail, prepared for univers N interior installation system. Busbar bushings can be flanged next to one another through open side walls. Transparent door with sheet steel frame, powder-coated and burned-in, surface-mounted with internal hinges, can be attached on the right or left. Door opening angle 120°, from a width of 1100 mm double door, door lock with standard built-in four-point bar lock (single door) or 3-point bar lock (two doors) with 3 mm double bit. Upper cable entries: 2 rows are punched out in the cover plate per field, different cable entries (plastic or metal) can be installed. Lower cable entries: open, base plates can be installed. Compliance with the degree of protection is required for installing the cable entries at the top/bottom. Note: A skirting board (100 mm or 200 mm) must always be installed (accessory)! Matching side panels are available as accessories. Door lock can be exchanged for other locks.