Auxiliary contact block 1 NO/0 NC ZENL1111

ZENL1111 3389110115079 EAN/GTIN DE 33842582 WEEE

Our best price
£2.45 incl. VAT (£0.00)
£4.37 (-43.94% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Auxiliary switch block 1S ZENL1111 Number of contacts as changeover contact 0, Number of contacts... more
Auxiliary contact block 1 NO/0 NC ZENL1111 – Schneider Electric – 3389110115079: Auxiliary switch block 1S ZENL1111 Number of contacts as changeover contact 0, Number of contacts as NO contact 1, Number of contacts as NC contact 0, Number of error signal switches 0, Rated operational current Ie at AC-15, 230 V 3A, Design of the electrical connection Screw connection, Design can be integrated, Type of installation Base mounting, socket without, auxiliary contact Harmony XALD / XALK. without detent, contact: 1 NO, stepped switching. rear assembly. For XAPS control station.
... more
Number of contacts as normally open 1
Rated operational current Ie at AC-15, 230 V 3 A
Execution integrable
Mounting Floor mounting
Version without

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Auxiliary contact block 1 NO/0 NC ZENL1111"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.