SINAMICS PM250 18.50kW - Frequency converter 380...480V 18,5kW 6SL3225-0BE31-5AA0

SINAMICS PM250 18.50kW - Frequency converter 380...480V 18,5kW 6SL3225-0BE31-5AA0 – Siemens – 4019169455244: SINAMICS PM250 18.50 kW 6SL3225-0BE31-5AA0 Mains voltage 380... 480V, mains frequency 50/60 Hz, number of input phases 3, number of output phases 3, max. output frequency 550Hz, rated output current I2N 38A, max. power output at square. Load at rated output voltage 18.5kW, Max. power output with linear load at rated output voltage 15kW, Relative symmetrical mains frequency tolerance 5%, Relative symmetrical mains voltage tolerance -10%, Can be used in the industrial sector, 4-quadrant operation possible, Type of converter U converter, protection class ( IP) IP20, height 512mm, width 275mm, depth 204mm, SINAMICS G120 Power Module PM 250 with integrated class A filter capable of energy recovery 3AC380-480V+10/-10% 47-63Hz power high overload: 15kW at 200% 3S, 150 % 57S, 100% 240S Ambient temperature 0 to +50°C, power low overload: 18.5kW at 150% 3S, 110% 57S, 100% 240S Ambient temperature 0 to +40°C 512x 275x 204 (HxWxD), FSD protection class IP20 Without Control Unit and BOP Power Module SINAMICS PM250 Power Module IP20 degree of protection for the modular SINAMICS G120 frequency converter. The Power Modules are suitable for a large number of applications in general mechanical engineering. Any braking energy that occurs is fed back directly into the mains (four-quadrant applications - no brake chopper required). The Power Module PM250 contains a technology that is unique worldwide, the Efficient Infeed Technology. Thanks to the regenerative feedback capability that is achieved in this way, energy is fed back into the network in generator mode (electronic braking) and is not destroyed in a braking resistor, which saves space in the control cabinet. The complex design of the braking resistor and the associated wiring are therefore no longer necessary, and the heat generated in the control cabinet is reduced. The innovative circuit technology also ensures that there are fewer mains harmonics, and there is no need for an optional mains choke at the mains input. This saves space and effort in project planning and procurement. The permitted cable lengths between the converter and the motor are limited. In order to be able to achieve longer cable lengths, output chokes can be connected. The PM250 Power Module is also suitable for use in safety-related applications. In conjunction with a fail-safe control unit, the drive becomes a Safety Integrated Drive. The PM250 Power Modules are available in a three-phase voltage range between 380 V and 480 V and in frame sizes FSC to FSF. Frame sizes FSD to FSF are available both with and without an integrated class A line filter. For frame size FSC with an integrated class A line filter, there is an additional base filter to achieve class B. The PM250 Power Modules with an integrated line filter class A are suitable for connection to TN systems, those without an integrated line filter are suitable for connection to grounded TN/TT and ungrounded IT systems. Shield plates and shield connection kits are available for EMC-compliant wiring of the Control Units and Power Modules. SINAMICS - the integrated drive family for every area of application.