Fan coil controller 2x0-10V 3-stage REG - KNX Heating actuator for home automation FCC/S1.2.2.1

Fan coil controller 2x0-10V 3-stage REG - KNX Heating actuator for home automation FCC/S1.2.2.1 – ABB – 2CDG110213R0011 – 4016779011457: Fan coil controller 2x0-10V 3-stage REG FCC/S1.2.2.1 bus system KNX, other bus systems without, mounting type REG, width in modular units 6, with bus coupling, control variable constant, control variable switching, valve protection function, manual switching, number of binary inputs 4 , Max. switching current (resistive load) 16A, number of outputs 6, switching voltage 24 ... 230V, degree of protection (IP) IP20, for controlling fan coil units or fan convectors. Two analogue valve drives or a 6-way valve drive for heating or cooling can be controlled via two analogue outputs. The device has three relay outputs for fan control. A relay output switches an additional load of up to 16 A, e.g. B. an electric auxiliary heater. The room status can be recorded and monitored via 4 inputs (can be used for window contact, dew point sensor, fill level sensor or temperature sensor). It is also possible to connect an analogue room control unit (SAR/A or SAF/A) to the inputs of the device. To regulate the room temperature, the device has an integrated room temperature controller, which can be used directly to control the outputs of the device. The FCC/S 1.2.2.1 has an easy-to-use on-site control. The ABB i-bus tool can be used for extended diagnostic functions and improved commissioning.