Blind actuator with sensor inputs - Sunblind actuator for bus system 1-ch PL-SAM2

Blind actuator with sensor inputs - Sunblind actuator for bus system 1-ch PL-SAM2 – Eltako – 31100002 – 4010312316689: Blinds actuator with sensor inputs PL-SAM2 Powernet bus system, Other bus systems without, Flush mounting type, With bus coupling, With LED display, Number of inputs 2, Switching current ohmic 3A, Max. switching capacity 650W, Max. number of blind outputs 1, Switching function, Type of current AC, Min. depth of the device socket 25mm, Powerline blinds actuator for 1 motor. 53x43mm, 25mm deep, for mounting in 58mm switch boxes. 1+1 closer for motors up to 3A. 2 sensor inputs with internal low voltage. Standby loss only 0.5 watts. For controlling and switching in the same place. Only use potential-free switching elements. Internal low voltage at the sensor inputs. The control inputs can be used for a blind button or a blind switch. The running time is preset at 120 seconds and can be changed with the installation software SIENNA Professional. There are two rotary switches on the front for address assignment: The left rotary switch determines the group address g with 16 alphabetical values from A to P. The right rotary switch determines the element address e with 16 numerical values from 0 to 15. Above this there is a slide switch as Configuration switch with positions 0,1 and 2. To the left of the rotary switches is a red LED which indicates all activity. Next to it is the reset button and to the right of it a service pin. Functions according to the user manual. The connection terminals at the top are plug-in terminals for conductor cross-sections from 0.2mqm to 1.5mqm. Next to it are three strands with ferrules for the two control inputs with internal extra-low voltage.