Impulse Switching Relay 2-channel FSR14-2x

Impulse Switching Relay 2-channel FSR14-2x – Eltako – 30014002 – 4010312313718: Impulse switching relay 2-channel FSR14-2x bus system radio bus, other bus systems without, radio bidirectional, mounting type REG, width in modular units 1, max. switching capacity 2000W, output power 2000W, suitable for C-load, max. number of switching outputs 2, max. Switching current 16A, rated current 16A, rated operating voltage 12 ... 12V, with bus coupling, removable bus module, modular expansion option, degree of protection (IP) IP20, impulse switching relay with 2 channels, 1+1 NO contact potential-free 16A/250V AC, incandescent lamps 2000W, with DX -Technology. Bidirectional. Standby loss only 0.1 watts. Modular installation device for mounting on DIN rail. Connection to the Eltako RS485 bus. Bus cross-wiring and power supply with jumper. Simply connect the N conductor to terminal (N1) and L to 1(L) and/or N to (N2) and L to 3(L). This results in an additional standby loss of just 0.1 watts. If the supply voltage fails, the switching status is retained. When the supply voltage returns, it is switched off in a defined manner. The channels can be taught in independently of each other as ES and/or ER channels. Scene control: Several channels of one or more FSR14-2x for one scene each can be switched on or off with one of the four control signals of a button with double rocker taught in as a scene button. Central commands on the PC are sent with the wireless building visualization and control software GFVS. The LED under the upper rotary switch accompanies the teach-in process according to the operating instructions and indicates control commands during operation by flashing briefly.