Radio light actuator - Radio receiver 868MHz FL62NP-230V

Radio light actuator - Radio receiver 868MHz FL62NP-230V – Eltako – 30100530 – 4010312319109: Radio light actuator FL62NP-230V Suitable for pulse pushers, Suitable for switches, In the housing, Power supply 230 V AC, Push-button operation, Switching operation, Number of relays 1, Type of installation Flush-mounted, Material plastic, Material quality thermoplastic, Halogen-free, Other surface, Version The surface is matt, other type of attachment, color blue, suitable for degree of protection (IP) IP20, radio frequency 868MHz, rolling code system, number of commands 32, radio light actuator 10A/250V AC. Impulse switch with 1 NO contact, not potential-free. 230V incandescent and halogen lamps 1000W, ESL and 230V LED lamps up to 200W. Standby loss only 0.4 watts. For flush mounting. 49x51mm, 20mm deep. The connection terminals are plug-in terminals for conductor cross-sections from 0.2mqm to 2.5mqm. Up to 32 wireless universal pushbuttons, wireless direction pushbuttons, wireless central control pushbuttons and motion sensors can be taught in with the convenient touch technology. Bidirectional radio can be activated. Contact switching at zero crossing. Supply, switching and control voltage locally 230V. If the supply voltage fails, the switching position is retained. When the supply voltage returns, it is switched off in a defined manner. After installation, wait for the brief automatic synchronization before the switched consumer is connected to the mains. In addition to the radio control input via an internal antenna, this radio actuator can also be controlled locally with a conventional 230V control button that may be installed in front of it. A glow lamp current is not permitted.