Ceiling presence detector ws EB, 360 degrees, 24m PD-C360i/24DUOplusSM

Ceiling presence detector ws EB, 360 degrees, 24m PD-C360i/24DUOplusSM – ESYLUX – EP10426810 – 4015120426810: Ceiling presence detector ws EB, 360 degrees, 24m PD-C360i/24DUOplusSM Presence detector version, sensor type passive infrared, HVAC control, creep under protection/rear field monitoring, scanning angle 360°, optimal installation height 3m, stairwell surveillance, max. range to one side 12m, max. Presence area 50.33m², max. frontal range 5m, detection field diameter on the floor 24m, remote controllable, adjustable response brightness, teach function for response brightness, suitable for ceiling mounting, surface-mounted mounting type, connection type plug-in terminal, material plastic, material quality thermoplastic, halogen-free, surface untreated, design Matt surface, color white, RAL number (similar) 9010, protection class (IP) IP20, type of voltage AC, frequency 50 ... 60Hz, nominal voltage 230V, min. switch-on time 60s, max. switch-on time 30min, switch-off delay 300s, switch-on delay 30s, Horizontal detection angle 180 ... 360°, sensor swivel range, horizontal 0°, sensor swivel range, vertical 0°, response Brightness 5 ... 2000lx, max. switching capacity 2300W, suitable for C-load, temperature -25 ... 50°C, number of switching zones 1, max. inrush current 800A, control current 0mA, extension input, height 74mm, diameter 108mm, presence detector with 360° field of detection for surface mounting on the ceiling. Range of up to 24 m in diameter with a recommended mounting height of 3 m and for independent control of 2 lighting zones (window area and interior area) depending on presence and daylight. Additional switch contact (channel 3) HVAC for switching another light source or for controlling heating/ventilation/air conditioning depending on presence. Both light channels and HVAC contact with 16 A high-performance relays (tungsten pre-contact), especially suitable for switching capacitive loads such as e.g. E.g. electronic ballasts, parallel-compensated fluorescent lamps, compact fluorescent lamps, energy-saving lamps. Optimally suited for installation at great heights of up to 10 m, such as sports halls, warehouses, etc. Permanently stored factory program for immediate operational readiness. Easy programming by remote control with blue mode technology or by setting elements. Integrated switch for setting by remote control or setting dial - avoidance of operating errors and as protection against sabotage. Sources of interference are suppressed by reducing the sensitivity using a DIP switch. Additional button input per channel with switchover function room = ON + OFF/corridor = ON. Detector can be used fully or semi-automatically. Standard version as a surface-mounted device. Extension of the detection area by connecting slave devices. Targeted blanking of areas using the enclosed lens mask.