Flush-mounted ceiling motion detector, 360 degrees - Movement sensor 360° 3m MD-C 360i/8

Flush-mounted ceiling motion detector, 360 degrees - Movement sensor 360° 3m MD-C 360i/8 – ESYLUX – EP10055393 – 4015120055393: Ceiling motion detector UP, 360 degrees MD-C 360i/8 Motion detector type, sensor type passive infrared, forced switch-on, forced switch-off, scanning angle 360°, optimal installation height 3m, stairwell monitoring, override switch, max. range to one side 4m, max. range in front 3m, detection field diameter on floor 8m, remote controllable, response sensitivity adjustable, response brightness adjustable, with signal unit, teach function for response brightness, suitable for ceiling mounting, flush-mounted installation type, connection type plug-in terminal, material plastic, material quality thermoplastic, halogen-free, surface untreated, surface design matt, color white, RAL number (similar) 9010, transparent, degree of protection (IP) IP20, type of voltage AC, frequency 50 ... 60Hz, nominal voltage 230V, min. switch-on time 60s, max. switch-on time 30min, switch-off delay 0s, switch-on delay 30s, horizontal detection angle 180 .. 360°, sensor swivel range, horizontal 0°, swivel range h sensor, vertical 0°, response brightness 5 ... 2000lx, max. switching power 2300W, suitable for C-load, temperature -25 ... 50°C, number of switching zones 1, max. inrush current 800A, control current 0mA, extension input, Height 62mm, diameter 108mm, installation depth 24mm, installation diameter 60mm, min. depth of device box 24mm, motion detector with 360° detection area for ceiling mounting. Range of up to 8 m in diameter at a recommended installation height of 3 m (maximum installation height 5 m) for use in small rooms and passageways with little or no daylight. 16 A high-performance relay (tungsten pre-contact), especially suitable for switching capacitive loads such as e.g. E.g. electronic ballasts, parallel-compensated fluorescent lamps, compact fluorescent lamps, energy-saving lamps. Firmly stored factory program for immediate operational readiness. Automatic light control for applications without or with very little daylight. Easy programming by remote control with blue mode technology or by setting elements. Integrated changeover switch for setting via remote control or setting regulator - avoidance of operating errors and protection against sabotage. Sources of interference are suppressed by reducing the sensitivity using a DIP switch. Additional button input with switching function room = ON + OFF/corridor = ON. Standard version as a flush-mounted device. Surface or ceiling installation with accessories. Cover panel and design ring can be easily changed/painted (available in silver as an accessory). Extension of the detection area by connecting a maximum of 8 detectors in parallel. Targeted blanking of areas using the enclosed lens mask.