Switch, blinds actuator 16f/8f 16 A - KNX I/O device for home automation 502800

Switch, blinds actuator 16f/8f 16 A - KNX I/O device for home automation 502800 – Gira – 4010337061076: Switching, blind actuator 16f/8f 16 A 502800 Bus system KNX, Other bus systems without, Mounting type REG, Width in division units 3, With LED display, Local/manual operation, Max. switching current 16A, Max. number of switching outputs 16, Max. Number of blind outputs 8, function switching, protection class (IP) IP20, KNX switching actuator 24-fold 16 A Blind actuator 12-fold 16 A comfort REG plus Depending on the parameterization, the actuator can be used as a switching actuator or as a blind actuator. Mixed forms of switching and blind actuators are also possible. For the blind actuator function, two adjacent relay outputs are combined into one blind output. Features: Blind or switching operation can be parameterized. In blind mode, the adjacent outputs (A1 A2, A3 A4...) are combined to form a blind output. Mixed operation on one actuator (e.g. A1 & A2 blinds, A3 & A4 blinds, A5 switching, A6 switching...) possible. Up to 8 independent logic functions to realize simple or complex logical operations. Actively sending feedback or status messages can be delayed globally after bus voltage return or after an ETS programming process. Manual operation of the outputs independent of the KNX with intelligent LED status displays to save energy. Bistable relays. Supply from KNX bus, no additional power supply required. Simplified terminal connection (no terminal overlay). Blind functions: Operating mode can be parameterized: Control of slatted blinds, roller shutters, awnings, skylights or ventilation flaps. Separately parameterizable blind travel times with travel time extension for travel to the upper end position. For slat blinds, a slat travel time can be parameterized independently. Switching time when changing direction and times for short and long-term operation (Step, Move) can be set. Response when bus voltage returns and after an ETS programming process can be set for each output. Central control of all blind outputs via up to 6 long-term objects possible (UP, DOWN, permanently UP, permanently DOWN). Feedback of the blind position or the slat position. In addition, an invalid blind position or a drive movement can be reported. Active (sending on change or cyclically to the bus) or passive (object can be read) feedback functions. Assignments to up to 5 different safety functions (3 wind alarms, 1 rain alarm, 1 frost alarm), optionally with cyclic monitoring. The safety functions (objects, cycle times, priority) are created device-oriented together for all outputs. The assignment of individual outputs to the safety functions and the safety reactions can be parameterized in a channel-oriented manner. An extensive sun protection function with fixed and variable curtain or slat positions at the beginning or end of the function can be activated separately for each output. Including dynamic slat offset for slat blinds. Also with extended sun protection for integration into more complex shading controls (has separate automatic and locking objects). Optionally also with automatic heating/cooling and presence functions. Fabric tightening function for awnings. Advanced lock function with acknowledgment option. Ventilation function for windows with window contacts. Intelligent teaching function for curtain movement. Forced position function or blocking function can be implemented for each blind output. Up to 64 internal scenes can be parameterized per output. Scene memory function: Additional visual feedback. Advanced scene recall (toggle scenes). Switching functions: Independent switching of the switching outputs. Normally open or normally closed operation. Central switching function via up to 6 switching objects (ON, OFF, permanently ON, permanently OFF) and collective feedback. Feedback switching: Active or passive feedback function. Reaction to bus voltage failure or bus voltage recovery and after an ETS programming process can be set for each output. Logical linking function individually for each output. Locking function can be parameterized for each channel. Alternatively, forced position function separately for each output. Advanced lock function with receipt option. Time functions (switch-on, switch-off delay, staircase lighting function - also with advance warning function). Inclusion in light scenes possible: Up to 64 internal scenes can be parameterized per output. Scene memory function: Additional visual feedback. Advanced scene recall (toggle scenes). Operating hours counter can be activated individually for each output. Input monitoring for cyclic updating of the switching object with safety position. Logic functions: The device has 8 internal logic functions. Logic gates (AND, OR, exclusive AND, exclusive OR, each with up to 4 inputs). 1-bit to 1-byte converter with input filter, blocking object and specification of the output values. Blocking element with filter and time functions and blocking object. Comparator for values with 9 different input data formats and many comparison operations. Limit switch with hysteresis with upper and lower threshold values for 9 different input data formats. Including specification of the 1-bit output values. The logic functions have their own KNX communication objects and can process telegrams from the actuator or other bus devices. Notes: KNX Data Secure compatible. Fast download of the application (long frame support). Firmware updates are possible with the Gira ETS service app (additional software). Mounting on DIN rail.