Switch, blinds actuator 24f/12f 16 A - KNX I/O device for home automation 503000

Switch, blinds actuator 24f/12f 16 A - KNX I/O device for home automation 503000 – Gira – 4010337060987: Switching and blind actuator 24f/12f 16 A 503000 bus system KNX, other bus systems without, mounting type REG, width in modular units 8, with LED display, local/manual operation, max. switching current 16A, max. number of switching outputs 24, max. Number of blind outputs 12, switching function, protection class (IP) IP20, KNX button, rocker 1-fold black matt Features: KNX button with integrated bus coupler. Integrated temperature sensor. Rocker or button function can be set for each control surface. Up to four functions can be controlled via the button function of the KNX button. Functions: switching, dimming, blinds, value transmitter, scene extension, 2-channel operation and controller extension. Switching: The command when pressing and/or releasing is adjustable (no reaction, switch on, switch off, toggle). Dimming: The command when pressing, the time between switching and dimming, dimming in different stages, the telegram repetition after a long press and the sending of a stop telegram at the end of the press can be set. Blinds: The command when pressing and the operating concept can be set. The operating concept can be adjusted in the times for short and long operation and slat adjustment. Value transmitter: The functionality (1-byte and 2-byte value transmitter) and the value can be set. Scene extension: The functionality (with or without memory function) and the scene number can be set. 2-channel operation: Up to two telegrams can be sent to the KNX by pressing a button. The operating concept can be set and the time for short and long operation can be adjusted. The function of the channels can be set separately from each other. Controller extension: The functionality (operating mode switchover, forced operating mode switchover, presence function and setpoint shift) can be set. Blocking function can be activated. Functions of the status LED: Each status LED can be configured independently of the control surface. Status LED functions: always OFF, always ON, actuation display, telegram acknowledgment, status display, control via separate LED object, operating mode display, controller status display, presence status display and setpoint shift display. Color can be parameterized. The color selection is made either together for all status LEDs or separately for each status LED of the device. The status LEDs can light up either red, green or blue. The brightness of the status LED can be set in five stages. With night reduction, the brightness of the status LED can be reduced at night using a communication object. In addition, a superimposed function can be released for each status LED, whereby a different color and type of display can be set. Controller extension properties: External room temperature controllers can be controlled by the button sensor function controller extension. Operating mode switchover, presence function and setpoint shift. Evaluation of the controller status via the status LED. Measurement of the room temperature with an internal sensor or optionally by forming the measured value of the internally measured temperature with an external temperature. Notes : KNX Data Secure compatible. Firmware updates are possible with the Gira ETS Service app (additional software). When using the Gira TX_44, use the IP20 adapter frame and cover from the System 55. Illuminated in accordance with the workplace ordinance (ArbStättV).