Switch, blinds actuator 24f/12f 16 A - KNX I/O device for home automation 504000

Switch, blinds actuator 24f/12f 16 A - KNX I/O device for home automation 504000 – Gira – 4010337060970: Switch blind actuator 24f/12f 16 A 504000 bus system KNX, other bus systems without, mounting type REG, width in modular units 8, with LED display, local/manual operation, max. switching current 16A, max. number of switching outputs 24, max. number of Blind outputs 12, switching function, protection class (IP) IP20, KNX Switch actuator 24-fold 16 A Blind actuator 12-fold 16 A comfort REG plus Depending on the configuration, the actuator can be used as a switch actuator or as a blind actuator. Mixed forms of switching and blinds actuators are also possible. For the shutter actuator function, two adjacent relay outputs are combined to form one shutter output. Features: Blind or switching operation can be parameterized. In shutter operation, the adjacent outputs (A1 A2, A3 A4...) are combined to form one shutter output. Mixed operation on one actuator (e.g. A1 & A2 blinds, A3 & A4 blinds, A5 switching, A6 switching...) possible. Up to 8 independent logic functions to realize simple or complex logic operations. Actively transmitting feedback or status messages can be globally delayed after bus voltage return or after ETS programming. Manual operation of the outputs independent of the KNX with intelligent LED status displays to save energy. Bistable relays. Supply from the KNX bus, no additional power supply required. Simplified terminal connection (no terminal overlap). Blinds functions: Configurable operating mode: Control of slat blinds, roller shutters, awnings, skylights or ventilation flaps. Separately configurable curtain travel times with travel time extension for travel to the upper end position. In the case of slat blinds, a slat movement time can be configured independently. Changeover time when changing the direction of travel and times for short and long-term operation (step, move) can be set. Response on bus voltage return and after ETS programming can be set for each output. Central control of all blind outputs possible via up to 6 long-term objects (UP, DOWN, permanent UP, permanent DOWN). Feedback of the curtain position or the slat position. In addition, an invalid blind position or a drive movement can be reported. Active (in the event of a change or sending cyclically to the bus) or passive (object can be read out) feedback functions. Assignments to up to 5 different safety functions (3 wind alarms, 1 rain alarm, 1 frost alarm), optionally with cyclical monitoring. The safety functions (objects, cycle times, priority) are created device-oriented together for all outputs. An assignment of individual outputs to the safety functions and the safety reactions can be parameterized channel-oriented. A comprehensive sun protection function with fixed and variable curtain or slat positions can be activated separately for each output at the beginning or end of the function. Including dynamic slat offset for slat blinds. Also with extended sun protection for integration into more complex shading controls (has separate automatic and blocking objects). Optionally also with automatic heating and cooling and presence function. Cloth tightening function for awnings. Extended locking function with acknowledgment option. Ventilation function for windows with window contacts. Intelligent teaching function for blind movement. Forced position function or blocking function can be implemented for each blind output. Up to 64 internal scenes can be configured for each output. Scene memory function: Additional visual feedback. Extended scene recall (toggling of scenes). Switching functions: Independent switching of the switching outputs. Normally open or normally closed operation. Central switching function via up to 6 switching objects (ON, OFF, permanently ON, permanently OFF) and collective feedback. Feedback switching: Active or passive feedback function. Response to bus voltage failure or bus voltage return and after ETS programming can be set for each output. Logical link function individually for each output. Blocking function can be configured for each channel. Alternatively forced position function separately for each output. Extended blocking function with acknowledgment option. Time functions (switch-off delay, staircase lighting function - also with pre-warning function). Inclusion in light scenes possible: Up to 64 internal scenes can be configured for each output. Scene memory function: Additional visual feedback. Extended scene recall (toggling of scenes). Operating hours counter can be activated individually for each output. Input monitoring for cyclic updating of the switching object with safety position. Logic functions: The device has 8 internal logic functions. Logic gates (AND, OR, exclusive AND, exclusive OR, each with up to 4 inputs). 1-bit to 1-byte converter with input filter, blocking object and specification of the output values. Blocking element with filter and time functions and blocking object. Comparator for values with 9 different input data formats and many comparison operations. Limit switch with hysteresis with upper and lower threshold for 9 different input data formats. Including specification of the 1-bit output values. The logic functions have their own KNX communication objects and can process telegrams from the actuator or other bus devices. Notes : KNX Data Secure compatible. Fast download of the application (Long Frame Support). Firmware updates are possible with the Gira ETS Service app (additional software). Mounting on DIN rail.