Smoke alarm device standard Q, 3V, white - Optic fire detector TG600AL

Smoke alarm device standard Q, 3V, white - Optic fire detector TG600AL – Hager – 3599430010514: Smoke alarm device standard Q,3V,white TG600AL operating principle optical, response temperature -10°C, standalone, max. number that can be networked 0, primary power supply battery/rechargeable battery, supply voltage 3 ... 3V, voltage type of the supply voltage DC, backup battery supplied without, volume 85dB (A), mounting type other, length 97mm, width 97mm, height 37mm, diameter 97mm, color white, RAL number (similar) 9010, type of test/pause button combination, cable entry not applicable, degree of protection (IP) IP32, with Q label, standard KRIWAN Q smoke alarm device, 3V DC, white. Small-sized smoke alarm device with an appealing design language according to DIN EN 14604 with additional certification according to the increased test requirements of the Q certification based on the vfdb guidelines 14-01 ?Association for the Promotion of German Fire Protection? (vfdb). Increased test criteria against the ingress of foreign bodies and increased protection against damp heat, oxidation and EMC, as well as better thermal cycling stress. Used for the early detection of fires with smoke development in the interior. Processor-controlled function self-test (every 10 seconds) and PGSA technology with independent algorithmic re-triggering in the event of interference such as dust to maintain functional reliability. Large function and reset button through the entire top cover of the detector. Acoustic signal (85 dB at 3 m) and red flashing LED for alarm. Acoustic signal for low battery, soiling or error message with acoustic signaling and yellow LED. Time-limited deactivation function of smoke detection to suppress false alarms from the detector for approx. 12 minutes with automatic reset function to normal operation. Error messages can be delayed by 8 hours for 7 days by acknowledging the reset button. The fault of a dirty detection unit cannot be reset as long as the error message is still present in the evaluation unit. Ceiling mounting or wall mounting according to the specifications of DIN14676 possible. The detector has camping/caravan approval. Dismantling and theft protection can be activated, then unlocking is only possible with a screwdriver with a maximum size of 7mm. The detector is automatically activated when it is screwed into the base. Battery life of at least 10 years using an encapsulated lithium battery.