DALI control with room controller - Interface for bus system LCN - SHD

DALI control with room controller - Interface for bus system LCN - SHD – Issendorff – 30307: DALI control with room controller LCN - SHD Type of installation Recessed installation, Rated voltage 230V, Frequency 50 ... 60Hz, Dimming DALI, Type of operation radio, Can be used with button, The LCN-SHD is a control module for DALI operating devices with full LCN functionality: the LCN -SHD controls and regulates climate, light, etc. as a fully-fledged room controller. DALI: 4 light circuits can be controlled with full LCN functionality (compared to DALI more functions). All ballasts on the DALI bus can be controlled directly, since any DALI telegrams can be transmitted via the LCN bus. In this way, DALI direct commands can also be assigned to LCN buttons. In addition, the LCN-SHD has a 0-10V output that can be used, for example, for climate control. For pure 0-10V applications, the DALI output can also be switched to 0-10V, so that two 0-10V outputs are available. Application The LCN-SHD component is used in dry rooms in sub-distribution boards. It occupies 2 TE. The LCN-SHD only supports the initial DALI configuration in single mode. If there are several electronic ballasts on the bus line, please use an appropriate programming device