SpaceLogic KNX IP router DIN rail - KNX Ethernet interface for bus system MTN6500-0103

SpaceLogic KNX IP router DIN rail - KNX Ethernet interface for bus system MTN6500-0103 – Merten – 3606489917845: SpaceLogic KNX IP router DIN rail MTN6500-0103 bus system KNX, other bus systems without, design interface Ethernet, mounting type REG, width in modular units 1, with LED display, updateable, operating voltage 24V, protocol TCP/IP, degree of protection (IP) IP20 , Spacelogic KNX IP Router DIN rail. The Spacelogic KNX IP router enables telegrams to be forwarded between different lines via a LAN (IP) as a fast backbone. In addition, this KNX IP router is suitable for connecting a PC to the KNX network, e.g. for ETS programming. The KNX IP router supports the KNX Security, which can be activated in the ETS. As a secure router, the device enables unsecured communication on KNX TP to be coupled to a secure IP backbone. For the interface functionality (tunnelling), the KNX security prevents unauthorized access. The router supports up to 8 tunneling channels. A separate individual address must be configured for each tunneling channel. The IP address can be obtained via a DHCP server or by manual configuration (ETS). This KNX IP router works according to the KNXnet/IP specification and uses the core, device management, tunneling and routing part. The Spacelogic KNX IP router has an extended filter table for the main group 0 to 31 and can buffer up to 150 telegrams. The router is powered via the KNX bus. An additional power supply is not required. With 2 integrated pushbuttons for test purposes and 3 status LEDs. For mounting on a TH35 DIN rail according to EN 60715. The bus is connected via a bus connection terminal. The connection to the LAN network is made via the RJ45 socket. Device width - 1 module = approx. 18 mm. Note - This application requires ETS 5 or higher. Contents - With bus connection terminal and cable cover.