SpaceLogic KNX USB interface. DIN rail - KNX USB Interface for home automation MTN6502-0101

SpaceLogic KNX USB interface. DIN rail - KNX USB Interface for home automation MTN6502-0101 – Merten – 3606489917869: SpaceLogic KNX USB interface. DIN rail MTN6502-0101 bus system KNX, other bus systems without, version USB, mounting type REG, width in modular units 1, material other, material quality other, surface untreated, surface design not applicable, color white, max. transmission rate 9600Bd, with bus coupling, With labeling field, with LED display, degree of protection (IP) IP20, Spacelogic KNX USB interface DIN rail. For connecting a programming or diagnostic device with a USB 2.0 interface to the KNX. The USB plug (type C) is galvanically isolated from the KNX bus. It can be used as a programming interface for the ETS software version 4 (or higher). The device is programmed locally with the physical address and has no programming button and no programming LED. With 2 status LEDs. The KNX USB interface supports KNX longframe communication and is compatible with KNX safety telegrams/devices. This enables faster KNX downloads if the target device supports it (e.g. MTN6725-0001). For mounting on a TH35 DIN rail according to EN 60715. The bus is connected via a bus connection terminal. Device width - 1 module = approx. 18 mm. Contents - With bus connection terminal and cable cover.